Vol 1

Question 0

What form is commonly used by supervisors to document safety, fire protection and health training?

Answer 0

Form 55

Question 1

What afi requires that supervisors provide specialized safety, fire protection, and health OJT to all assigned Air Force personnel?

Answer 1

91-202 us Air Force mishap prevention program

Question 2

Who can use knock it off to pause or terminate any work activity that they believe is unsafe or too dangerous?

Answer 2

Any one regardless of rank

Question 3

What’s the purpose of the afosh program?

Answer 3

To prevent or reduce severity of personal injuries and property damage

Question 4

Which afi is the foundation for the afosh program

Answer 4

Afi 91-203 airforce consolidated occupational safety instruction.

Question 5

Which afosh std covers emf radiation

Answer 5

Afi 48-9 electro-mag freq radiation occupational health program

Question 6

What are the limits for potential haz noise identified in afosh std 48-20?

Answer 6

8 hr exposure prd to sound of 85 dB min, or San impact noise greater than140 dB

Question 7

What does afi 91-202 require u to do regarding personal injury?

Answer 7

Report it to ur supervisor as soon as possible to be the next time it’s needed.

Question 8

Which afi contains guidelines regarding personal protective equip?

Answer 8

Afi 91-203

Question 9

Which afi currently contains guidance pertaining to the hazcom program?

Answer 9

Afi-821

Question 10

What t.o covers the use and care of hand tools?

Answer 10

32-1-101

Question 11

Why should u put ur tools where they belong when u complete a job?

Answer 11

To make sure the job is easier and ensures each tool is where it’s suppose to be the next time it’s needed

Question 12

Name two things u should check bef plugging in a power tool?

Answer 12

Ensure per is off

Very it has the correct voltage, current, hertz (Freq)

Question 13

When can an interlock be disconnected or bypassed?

Answer 13

During maintenance or adj only when prescribed by t.os

Question 14

Define high voltage

Answer 14

600 volts or higher

Question 15

When is it applicable to work alone around high voltages ?

Answer 15

Never

Question 16

When do u require a safety observer when u’re repairing electronic equipment?

Answer 16

When working wt / or repairing electronic sys that may expose u to high volt of 600 volts, nominal, or more or current flow of 50 miliamps or more.

Question 17

When is grounding or shorting stick required?

Answer 17

When equip uses high volt

Question 18

What to covers gas cylinder use, handling and maintenance?

Answer 18

42b5-1-2

Question 19

When can color coding be relied upon to identify cylinders maybe expose to?

Answer 19

Never rely on color to id

Question 20

What is max temp that a gas cylinder maybe expose to?

Answer 20

125f

Question 21

When is thread seal tape used on compressed gas cylinders?

Answer 21

Never

Question 22

When should a gas cylinder be consider empty? How would u mark it?

Answer 22

When at least 25 psi remaining write mt an attach appropriate tag and attach to cylinder.

Question 23

Which afosh std deals with the emf safety program?

Answer 23

Afosh std 48-9

Question 24

What r the 3 classifications of rf haz

Answer 24

(Dii) direct bio haz Indirect bio haz Indirect haz

Question 25

List ur individual responsibilities when ur working with and around emf

Answer 25

1) Follow procedures for safe work in afosh 48-9' equip t.o, manuals and unit ois. 2) follow procedure estab by supervisor to ensure safe working conditions 3) ensure require warning signs and safety devices are in place n function bef beginning work 4) promptly report any suspected overexposure and any unsafe work condition to a supervisor