Windows (Focused)

Question 1

Waterproofing

Joint Sealants

Answer 1

16. Sealants ot joints in top surfaces, vertical surfaces, and soffits shall be given seperately

m

Question 2

Metalwork

Windows, doors, etc of rolled sections

Answer 2

32. Ironmongery and attached burgler bars shall be included in the descriptions 33. Components of coupled windows and doors may be given seperately, in which case coupling of mullions and transoms shall be given in either meters or number 34. Sub-frames, sills, surrounds, sliding gear, etc. may be included in the descriptions or given seperately in meters or in number 35. Steel and other panels, fixed steel lourvres and fixed louvre shoes may be included in the descriptions or given seperately in number

No. | Reference from schedule or specifications

Question 3

Glazing

Classification

Answer 3

1. Classified according to type, quality, thickness and size 2. Descriptions of glass shall state the methos of glazing and the material of the frames to receive the glass 3. Descriptions of glass in beaded frames shall state the method by which beads are fixed 4. Glass shall be grouped according to size in the following cats: * N.e 0,1m² * Exceeding 0,1m² and n.e 0,5m² * Exceeding 0.5m² and n.e 2m² * Thereafter, in stages of 2m²

m²

Question 4

Glazing

Glass

Answer 4

m²

Same rules of glazing Classification

Question 5

Glazing

Glass in shapes which are not rectangular

Answer 5

m²

Same rules of glazing Classification

Question 6

Glazing

Glazing Beads

Answer 6

5. Glazing beads shall be given separately in the relevent trades

Question 7

Paintwork

Paintwork on windows, sash doors, fanlights, lourved units, etc.

Answer 7

11. Shall be measured over the full flat area of both sides * Both sides =2/2/…LxH 12. Painting “cottage pane” windows etc. and windows with burgler bars, steel louvres, etc. shall be given seperately

m² | Mention material of frame as per classification clause 1