Workshop tools and materials Flashcards
(32 cards)
What is a 2.5mm drill bit used for?
A 2.5mm drill bit is used for making small holes in various materials.
What is a 7mm drill bit used for?
A 7mm drill bit is used for creating medium-sized holes in materials.
What is abrasive paper?
Abrasive paper is used for sanding and smoothing surfaces.
What is an adjustable clamp?
An adjustable clamp is a tool used to hold objects securely in place.
What is an axle?
An axle is a rod or spindle that passes through the center of a wheel or a pair of wheels.
What is an axle jig?
An axle jig is a tool used to ensure accurate alignment of axles during assembly.
What is an axle pin?
An axle pin is a fastener used to secure the axle in place.
What is a bamboo skewer?
A bamboo skewer is a thin stick made from bamboo, often used for cooking or crafting.
What is a bench hook?
A bench hook is a tool used to hold workpieces securely on a workbench.
What is a bench vice?
A bench vice is a mechanical device used to hold an object firmly in place.
What is a centre punch?
A centre punch is a tool used to create a dimple in a workpiece for drilling.
What is a chisel?
A chisel is a tool used for carving or cutting hard materials.
What is a claw hammer?
A claw hammer is a tool used for driving nails and removing them.
What is a coping saw?
A coping saw is a saw used for intricate cutting and shaping of wood.
What is a cordless drill?
A cordless drill is a power tool used for drilling holes without a power cord.
What is a depth stop?
A depth stop is a device used to limit the depth of a drilled hole.
What is a disc sander?
A disc sander is a power tool used for sanding surfaces using a rotating disc.
What is a dowel?
A dowel is a cylindrical rod used to reinforce joints in woodworking.
What is a drill press?
A drill press is a machine used for drilling precise holes in materials.
What is a dust extractor?
A dust extractor is a device used to remove dust and debris from the air.
What is a Forstner bit?
A Forstner bit is a type of drill bit used for making flat-bottomed holes.
What is grain direction?
Grain direction refers to the alignment of wood fibers in a piece of lumber.
What is a hole saw?
A hole saw is a tool used to cut circular holes in various materials.
What is a marking gauge?
A marking gauge is a tool used to mark lines parallel to an edge.
