Communications Flashcards
The SATCOM system provides ____.
both data and voice communications
After cockpit oxygen mask use, the boom mikes can be enabled by ____.
closing the left oxygen mask storage box door and pressing the RESET/TEST lever
On the ground with both engines shut down, any VHF radio that transmits for more than 35 seconds ________.
is automatically disabled
radio an intermittent tone can be heard
radio dashes appear in the tuning panel frequency window for that radio (200ER)
radio
all of the above
In the event an HF or VHF radio transmits for more than 30 seconds in flight, the EICAS message ____ is displayed.
RADIO TRANSMIT
On the Audio Control Panel, only one Transmitter Selector Switch can be selected at a time.
True
The Data mode is available on radios ____
VHF R and CTR
When the offside tuning light is illuminated, it means that ____.
the radio normally associated with the panel is being tuned by another tuning panel, or the radio panel is being used to tune another radio
Incoming notification of cabin calls is made available to the pilots through ____.
EICAS communications messages and chimes
The ____ menu selection allows display of CPDLC downlink message pages.
MFD COM, ATC
ATC Datalink (CPDLC) Log On is accomplished through the ____.
MFD COMM – ATC – Log On/Status page
How is an incoming ATC uplink message annunciated and where are they displayed?
ATC displays on EICAS.
An aural alert chime will sound.
The message will display in the EICAS ATC Uplink Message Block.
All of the above
Priority cabin interphone calls made to the flight deck while a normal cabin interphone call is in progress will automatically be connected as a conference call.
False
What are the flight indications of an incoming cabin priority call?
A CABIN ALERT EICAS message accompanied by an aural alert chime
If a HF or VHF radio transmits for more than 30 seconds, the EICAS advisory message RADIO TRANSMIT is displayed.
True
Which of the following occurs when a transmitter select switch is pushed the first time?
The MIC light for the selected switch illuminates and all other transmitter switches extinguish.
The respective transmitter (radio or intercommunications) is selected for transmission.
The respective receiver audio is selected on if not already manually selected on.
All of the above.