Flight Operations Flashcards

1
Q

How is air worthiness verified?

A

Aircraft’s Certificate of Airworthiness

Pre-Flight Inspection (walk around)

Required Equipment

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What is included in the pre flight inspection?

A

Crew License/Medical, POH, Registration, Airworthiness Certificate, Insurance, Journey log book

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What crew qualifications and proficiency should be verified prior to flying?

A

License validity, recency (6, 24, 60 month), pilot proficiency check

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What factors are included in flight planning?

A

Weather, NOTAMs, weight and balance, studied routes and destinations, charts and publications, flight plan, preflight inspection, required equipment onboard, informing passengers

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

What should passengers be briefed on before flight?

A

Seats and seat belts, normal and emergency exists, stowage of baggage, first aid, survival equipment, fire extinguisher, ELT, smoking, action in the event of an emergency, questions

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Define datum, moment, and arm

A

Datum: an imaginary vertical plane or line from which all measurements of the arm are taken

Moment: product of the weight of an item multiplied by its arm and expressed in pound inches. Total moment is the weight of the aircraft multiplied by the distance between the datum and the center of gravity

Arm: horizontal distance in inches from the reference datum line to the C of G of the item

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What are center of gravity limits?

A

Specified forward and aft or lateral points beyond which the C of G must not be located at any time

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

What will happen to an aircraft if the center of gravity is beyond it’s limit?

A

Aircraft may rotate prematurely on take-off and pitch up during the climb. Longitudinal stability will also be reduced and this can lead to inadvertant stalls and spins. Recoveries from this may be prolonged or impossible.

If the center of gravity is too far forward, the aircraft’s stall speed will be increased

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What is empty weight and gross weight?

A

Empty weight: weight of the airframe, engines, and all operating equipement that have fixed locations

Gross weight: the max, loaded weight of the aircraft

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What is the formula for load adjustment?

A
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Baggage must be shifted from rear baggage area 125 to the forward baggage area 40. The aft C of G limit is 46, but the loaded C of G is 48. How much baggage should be moved forward?

A

70.5 lbs of baggage

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

What are critical surfaces?

A

Wings, control surfaces, propellers, rotors, horizontal stabilizers, and any other surfaces that contrinute to lift or stabilizing the aircraft

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

What is the clean aircraft concept? Why is it important?

A

Take-offs are prohibited when ice, snow, or frost is adhering to any surface. The concept is important because frozen contaminants can reduce lift by 30% and increase drag by 40%

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

What is the cold soaking phenomenon?

A

Occurs when the wings and fuel are much colder than the ambient temperature. Frost will form on the under and upper sides of the fuel tank region during ground turn-around time, and will reform when removed.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

What is white-out?tmosphere optical phenomenon of the polar regions in which the observer appears to be engulfed in a uniformly white glow. Neither shadows, horizon, nor clouds are discernible; sense of depth and orientation is lost; only very dark, nearby objects can be seen. Whiteout occurs over an unbroken snow cover and beneath a uniformly overcast sky. Blowing snow may be an additional cause

A
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

What are the negative effects of in-flight icing?

A

Ice on props will reduce efficiency and increase vibration

Visibility from cockpit is reduced

Jet engine compressor stalls due to large pieces of ice entering into the engine

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

What are hazards associated with thunderstorms?

A

Turbulence, wind shear, lighting, rain, icing

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

While flying in a thunderstorm, when will the greatest turbulence be felt?

A

Updrafts (6000+ feet per minute)

Downdrafts (2000-2500+ feet per minute)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

Compare increased performance shear and decreased performance shear.

A

Increased performance shear is caused by a rapid increase in headwind or decrease in tailwind. Will cause the aircraft to overshoot the runway

Decreased performance shear is caused by a decrease in headwind or an increase in tailwind. Will cause the aircraft to undershoot the runway. Most dangerous

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

What are the dangers of lighting? What aircraft are more susceptible to lighting strikes?

A

Dangers include explosion of fuel vapor, loss of flight controls, loss of electrical power, pilot blindness

Larger and faster aircraft are more susceptible to lighting strikes

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

Explain the dangers of rain during a thunderstorm

A

The impact pressure of rain can wear down plexiglass, erode fiberglass and antennas, and peel paint off. Rain can also affect airborne radars and flame out jet engines.

Rain on the windscreen causes a distortion that will make terrain contours appear lower than reality (error of approx 5° down)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

What are warning stages of mountain waves?

A

Cap clouds, lenticular clouds, rotor clouds

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

What causes mountain waves?

A

Air pouring down the side of the mountain, creating eddies and vertical air currents

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

How fast are the downdrafts and updrafts caused by the mountain effect?

A

Downdrafts up to 2000 feet per minute, updrafts up to 5000 feet per minute

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

What are the two main ideas in collision avoidance?

A

Use the proper lookout and use the landing light (all day time aircraft in VFR conditions are required to run with all serviceable lights on in high traffic areas)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

Runway numbering is done corresponding to the nearest __°, and is expressed as a __________

A

10, magnetic value

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

What colour is the airport beacon and how often does it flash?

A

White, 20-30 evenly spaced times per minute

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
28
Q

What colours are threshold lights, end runway lights, and taxi way lights

A

Threshold: green

Runway: red

Taxi way: blue

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
29
Q

What colours are towers marked with? Are they lighted?

A
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
30
Q

Red and white. Towers can be lighted

A
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
31
Q

How far apart should taxi way lights be spaced?

A

Not exceeding 200 feet

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
32
Q

What is an ATC clearance?

A

Authorization from ATC for an aircraft to proceed within controlled airspace under specific conditions. Identified by “clear” in it’s text. Once accepted you are required to comply with the clearance

33
Q

What is an ATC instruction?

A

Directive by ATC for air traffic control purposes. You are required to comply with and acknowledge receipt of an intruction

34
Q

What is the maneuvering area? What is the apron?

A

Manuevering area: all parts of the airport intended for the movement of aircraft

Apron: area for loading and unloading the aircraft

35
Q

What should be remembered when taxiing?

A

Acknowledge instructions or advise of your intentions

Give way to taxiing aircraft

Pass to the right of opposing traffic

Taxi at the proper speed

Use proper wind control inputs

36
Q

Describe wind correction during taxiing

A
37
Q

Describe all the different marshalling gestures

A
38
Q

What causes wheelbarrowing? What is the result?

A

Occurs when pilot uses excess speed while making an approach in a full flap configration, or during takeoff when the pilot puts too much forward pressure on the control column as the aircraft accelerates.

Result is the main gear lifting off the ground and the nose gear staying on the runway

39
Q

How do you recover from wheelbarrowing?

A

Reduce power, release forward pressure, nose up and full power

40
Q

Describe the three types of hydroplaning

A

Dynamic Hydroplaning: occurs at high speeds with standing water on the runway reducing the aircraft’s cross wind capabilities

Viscous Hydroplaning: occurs at slower speed with only a thin film of water on a smooth runway

Reverted Rubber Hydroplaning: caused when the tires are locked up.

41
Q

What is the formula used to determine dynamic hydroplaning minimum speeds?

A
42
Q

What is the lift drag ratio?

A

The relationship between lift and drag. Obtained by diving the lift coefficient by the drag coefficient

43
Q

What is flight for maximum range? How can it be achieved?

A

The furthest an aircraft can fly per unit of fuel consumed. Can only be achieved by flying at an angle of attack that gives the best lift/drag ratio

44
Q

What is flying for maximum endurance? What affects it?

A

The maximum amount of time an aircraft can remain in flight for the given amount of fuel on board.

The time is less at higher powers and greater at lower powers

45
Q

When is establishing maximum endurance in flight advisable?

A

When a pilot is requested to hold clear of a control zone

46
Q

Describe the relationship between power and airspeed when flying for maximum endurance

A
47
Q

Describe the relationship between power and airspeed when flying for maximum range

A
48
Q

What is slow flight?

A

The range of airspeed between the maximum endurance speed for a particular aircraft, and a point just above the stall speed for the existing conditions of flight

49
Q

When is slow flight encountered?

A

On take-offs, landings, and recovery from misjudged landings

50
Q

Describe the power and drag curves for slow flight

A
51
Q

What is a stall?

A

A loss of lift and increase of drag that occurs when the critical angle of attack is exceeded. Can occur at any attitude and at any airspeed yet the critical angle of attack remains constant for the same aircraft

52
Q

What is the difference between a spin and spiral?

A

Spins occur when a stall is aggravated by a yaw. The wings are stalled. The airspeed is low and constant

A spiral is a steep descending turn in which airspeed, rate of descent, and wing loading increase rapidly. The airspeed may exceed VNE

53
Q

Why does the TAS increase with altitude?

A

The air density decreases at higher altitudes

54
Q

How does weight affect the stalling speed of an aircraft?

A

With added weight an aircraft must operate at a higher AOA to produce the lift necessary to support that weight. The critical AOA will be reached at a higher airpeed

55
Q

How does the center of gravity affect the stall speed?

A

It the centre of gravity is moved to its most allowable forward position, the aircraft stall speed will increase

56
Q

What will happen to the orientation of the aircraft is the centre of gravity is shifted to its most allowable forward position? What can be said about the aircraft’s weight?

A

The aircraft will have a ose down tendency which must be compensated with back pressure on the control column. This increased downloading on the horizontal tail can be considered an increase in the aircraft’s weight as it acts in the same direction

57
Q

What happens when the centre of gravity moves rearward?

A

The stall speed decreases due to the decreased downloading on the horizontal tail. This should not be used as a method of decreasing stall speed because it makes it harder to recover from a stall

58
Q

At what altitude does ground effect exert an influence?

A

At an altitude no greater than the aircraft’s wing span

59
Q

Is a low or high wing aircraft more affected by ground effect?

A

Low wing

60
Q

How much of a reduction in induced drag will a low wing airplane experience at the moment of take off?

A

about 48%, compared to the induced drag generated at flight altitude

61
Q

What is the effect of density and humidity on aircraft performance?

A

The more dense the air is the better the aircraft performance. The humidity adversely affects the density of the air and thus aircraft performance

62
Q

What generates lift?

A

The pressure differential over the wings

63
Q

What is the intensity of wing tip vortices proportional to? What types of aircraft will produce greater vortices and when?

A

Directly proportional to the weight of the aircraft and inversely proportional to the speed of the aircraft. Heavier, slower aircraft will produce greater vortices during take off and landing at near gross weights and high angles of attack

64
Q

Describe the three categories of aircraft weight

A

Group 1: heavy (max take off weight of 300,000lbs+)

Group 2: medium (max take off weight of 12,500-300,000lbs+)

Group 3: light (take off weight up to 12,500lbs)

65
Q

What are the radar seperations between different categories of aircraft?

A

Heavy behind heavy: 4nm

Medium behind heavy: 5nm

Light behind heavy: 6nm

Light behind medium: 4nm

66
Q

Describe your touchdown point relative to a heavy jet’s touchdown point when landing behind the jet

A
67
Q

Describe how you would avoid a heavy jet’s wing turbulence in the air

A
68
Q

Describe the jet blase area of a jumbo jet, medium jet, and executive jet

A
69
Q

Where are the three search and rescue co-ordination centres located?

A

Victoria, Trenton, Halifax

70
Q

What frequency do ELMs communicate on?

A

121.5Mhz and/or 243.0Mhz

71
Q

How long can ELMs provide continuous operation for?

A

48 hours

72
Q

What aircrafts do not require an ELT on board?

A

Gliders, balloons, airships, ultra-lights, gyroplanes, school operating aircraft <25nm

73
Q

What is included in the ELT pre-flight inspection?

A

Switch is in arm position, check batteries, listen on 121.5 to ensure the ELT is not transmitting

74
Q

How does an ELT sense a crash?

A

It contains a crash activation sensor, or G-switch which is designed to detend the deeleration characteristics of a crash and automatically activate the transmitter

75
Q

How do you turn the ELT on after a crash?

A

Assume the automatic activation feature has failed and place the three position switch in the “On” position as soon as possible. Once it is on, leave it on

76
Q

Where should the ELT be placed for best range?

A

As high as possible on a leel surface with no obstructions between it and the horizon. The antenna should be vertical (and ideally on a piece of metal to extend the transmission range)

77
Q

When can an ELT be tested?

A

Only during the first 5 minutes of any UTC hour, and for no longer than 5 seconds

78
Q

What are the two different emergency classifications?

A

Distress: condition of being threatened by serious and/or imminent danger requiring immediate assistance

Urgency: condition concerning the safety of an aircraft or vehicle, or of some person on board or within sight, which does not require immediate assistance

79
Q
A