Division 5: Project Development & Documentation Flashcards

1
Q

What are the five major variables that influence the space needed for mechanical equipment?

A

Scope of the system (local, centralized, or district), type of HVAC system, building size, building type, and passive systems use.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What is a local system in HVAC?

A

Generally, a system that only serves one zone, typically used for small buildings or for specific areas of a building.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What are some examples of a local system in HVAC?

A

A residential furnace, a window-mounted air conditioner, and commercial gas-fired heaters.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What is a centralized system in HVAC?

A

Generally, a system that serves multiple zones from one location, typically used in moderate- to large-sized commercial and institutional buildings.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

What is a district system in HVAC?

A

Generally, a single plant that provides heating and/or cooling services to several buildings.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

What are the three most common types of HVAC systems?

A

All-air, all-water, and air-water systems.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Which type of HVAC system requires the most space and why?

A

All-air system, because of the size of air handling units and the ductwork needed to distribute air throughout the building then return it to the central plant.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Which type of HVAC system requires the least space and why?

A

All-water system, because water pipes are smaller than air ducts and there are no supply air ducts.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Why do laboratories and hospitals generally need more mechanical equipment space than offices or apartments do?

A

Individual control is needed in many spaces and special provisions for ventilation and positive pressure are required in specific rooms.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

In a medium- to large-sized building with an all-air or air-water system, what is the preliminary size range of the mechanical room?

A

3% to 10% of the total building area being served

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

In a medium- to large-sized building with an all-water system, what is the preliminary size range of the mechanical room?

A

1% to 3% of the total building area being served

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

What is an air handling unit (AHU)?

A

Mechanical equipment that uses water from boilers and chillers to heat and cool air

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

An air handling unit (AHU) is rarely purchased and placed as a ready-to-use assembly. True or false?

A

False

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Why is it ideal to locate an air handling unit (AHU) near an exterior wall?

A

The amount of ductwork required to bring in fresh air and remove exhaust air is minimized

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

When locating a high rise building’s mechanical equipment, what are two factors to consider when deciding between the ground floor and the rooftop?

A

Structural requirements and noise control

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Between round and rectangular ducts, which shape is better at maintaining air pressure?

A

Round

17
Q

Between round and rectangular ducts, which shape is better at utilizing the available space?

A

Rectangular

18
Q

What is static head (or static pressure) in HVAC?

A

The amount of pressure, measured in inches of water, that must be applied to overcome frictional resistance (between moving air and duct components) and make air flow

19
Q

What is the preliminary cross-sectional area range for low-pressure duct space?

A

10 square ft to 20 square feet per 10,000 square feet of floor space served

20
Q

What is a chase in HVAC?

A

A fully enclosed shaft that contains only ducts and piping

21
Q

What is a mixing box in HVAC?

A

A component that controls the air that flows into a space from the main air supply line by adjusting quantity, velocity, temperature, and noise and is informed by signals from a thermostat

22
Q

What are the size ranges of a mixing box in HVAC?

A

Height ranges from 6” to 18”, length ranges from 24” to 60”, and width ranges from 14” to 66”

23
Q
A