Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

BSAeE 2-2 > AMCR COMPOSITES > Flashcards

AMCR COMPOSITES Flashcards

1
Q

is a material composed of solid materials of carry-load that
are contained in a material much weaker.

A

Composite Material

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

is often referred to as the stronger material and the weaker
material is usually referred to as the matrix.

A

Reinforcement

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

The reinforcement provides the requisite ____________ that helps to
sustain the structural load.

A

Strength and Stiffness

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

5 Types of Fiber

A

Fiber Glass, Kevlar, Carbon / Graphite, Boron, Ceramic

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Types of Fiberglass

A

Electrical glass or E-glass, S-glass, S2-glass

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

is identified as such for electrical applications. It has
high resistance to current flow and is made from borosilicate glass.

A

Electrical glass or E-glass

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

identify structural fiberglass that have a higher strength
than E-glass and is produced from magnesia-alumina-silicate.

A

S-glass and S2-glass

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Advantages of fiberglass

A

○ lower cost than other
composite materials,
○ chemical or galvanic
corrosion resistance, and
○ electrical properties
(fiberglass does not conduct
electricity).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

has a white color and is available as a dry fiber
fabric or prepreg material.

A

Fiberglass

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

are light weight, strong,
and tough.

A

Aramid fibers

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

DuPont’s name for aramid fibers.

A

Kevlar®

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Two types of Aramid fiber are used in the aviation industry.

A

Kevlar® 49, Kevlar® 29

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

A Kevlar that has a high stiffness

A

Kevlar 49

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

A Kevlar that has a low stiffness

A

Kevlar 29

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

An advantage of aramid fibers is their

A

high resistance to impact damage

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

The main disadvantage of aramid
fibers is their general

A

weakness in compression and hygroscopy

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

are very stiff and strong, 3 to 10 times stiffer than
glass fibers. It is used for structural aircraft applications, such as floor beams,
stabilizers, flight controls, and primary fuselage and wing structure.

A

Carbon and Graphite Fibers

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

Advantages of Carbon and Graphite Fibers

A

high strength and corrosion resistance.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

Disadvantages of Carbon and Graphite Fibers

A

lower conductivity than aluminum

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

are very stiff and have a high tensile and compressive strength. The fibers
have a relatively large diameter and do not flex well. Also. these are used to repair
cracked aluminum aircraft skins, because the thermal expansion of this is close
to aluminum and there is no galvanic corrosion potential.

A

Boron

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

are used for high-temperature applications, such as turbine
blades in a gas turbine engine.

A

Ceramic Fibers

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

The ceramic fibers can be used to temperatures up
to?

A

2,200 °F

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

Types of Matrix

A

Metal Matrix Composites, Ceramic Matrix Composites, Polymer Matrix Composites

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

are composed of a metallic matrix
(aluminum, magnesium, iron, cobalt, copper) and a dispersed ceramic (oxides,
carbides) or metallic (lead, tungsten, molybdenum) phase.

A

Metal Matrix Composites (MMC)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

are composed of a ceramic matrix and
embedded fibers of other ceramic material (dispersed phase).

A

Ceramic Matrix Composites (CMC)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

are composed of a matrix from thermoset
(Unsaturated Polyester (UP), Epoxy (EP)) or thermoplastic (Polycarbonate
(PC),Polyvinylchloride, Nylon, Polysterene) and embedded glass, carbon, steel
or Kevlar fibers (dispersed phase).

A

Polymer Matrix Composites (PMC)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

a generic term used to designate the polymer.

A

Resin

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
28
Q

Types of Resin

A

Thermoset, Thermoplastic

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
29
Q

are the most diverse and widely used of all man-made
materials. They are easily poured or formed into any shape, are compatible with
most other materials, and cure readily (by heat or catalyst) into an insoluble solid.
These resins are also excellent adhesives and bonding agents.

A

Thermosetting Resin

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
30
Q

can be softened repeatedly by an increase of temperature
and hardened by a decrease in temperature. Processing speed is the primary
advantage of thermoplastic materials. Chemical curing of the material does not
take place during processing, and the material can be shaped by molding or
extrusion when it is soft.

A

Thermoplastic Resins

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
31
Q

Types of Thermosetting Resins

A

Polyester, Vinyl Ester, Phenolic, Epoxy, Polyimides, Polybenzimidazoles, Bismaleimides

32
Q

are relatively inexpensive, fast processing resins used
generally for low cost applications. Low smoke producing ___________ are
used for interior parts of the aircraft.

A

Polyester Resin

33
Q

is the same as those of conventional polyester resins in
terms of appearance, handling properties, and curing characteristics of _______. However, the corrosion resistance and mechanical properties of
_________ composites are much improved over standard polyester resin
composites.

A

Vinyl Ester Resin

34
Q

are used for interior components because of their low smoke
and flammability characteristics.

A

Phenolic Resin

35
Q

are polymerizable thermosetting resins and are available in a variety of
viscosities from liquid to solid. These are used widely in resins for prepreg
materials and structural adhesives.

A

Epoxy

36
Q

excel in high-temperature environments where their thermal
resistance, oxidative stability, low coefficient of thermal expansion, and solvent
resistance benefit the design. Their primary uses are circuit boards and hot
engine and airframe structures.

A

Polyimides

37
Q

is extremely high temperature resistant and is used
for high temperature materials.

A

Polybenzimidazoles

38
Q

have a higher temperature capability and higher
toughness than epoxy resins, and they provide excellent performance at
ambient and elevated temperatures. Also, these are suitable for standard
autoclave processing, injection molding, resin transfer molding, and sheet
molded compound (SMC) among others.

A

Bismaleimides

39
Q

Types of Thermoplastic Resins

A

Semicrystalline, Amorphous, Polyether Ether Ketone

40
Q

possess properties of inherent flame
resistance, superior toughness, good mechanical properties at elevated
temperatures and after impact, and low moisture absorption. They are used in
secondary and primary aircraft structures.

A

Semicrystalline Thermoplastics

41
Q

are available in several physical forms, including
films, filaments, and powders. Combined with reinforcing fibers, they are also
available in injection molding compounds, compressive moldable random
sheets, unidirectional tapes, woven prepregs, etc.

A

Amorphous Thermoplastics

42
Q

a high temperature thermoplastic. This
aromatic ketone material offers outstanding thermal and combustion
characteristics and resistance to a wide range of solvents and proprietary fluids.

A

Polyether Ether Ketone (PEEK)

43
Q

Curing Stages of Resin

A

A, B, C

44
Q

The components of the resin (base material and hardener) have been mixed
but the chemical reaction has not started. The resin is in the ____ during a wet layup
procedure.

A

A Stage

45
Q

The components of the resin have been mixed and the chemical reaction
has started. The material has thickened and is tacky. The resins of prepreg materials
are in the ______.

A

B Stage

46
Q

The resin is fully cured. Some resins cure at room temperature and others
need an elevated temperature cure cycle to fully cure.

A

C Stage

47
Q

3 Types of Adhesives

A

Film, Paste, Foaming

48
Q

are available using high temperature aromatic amine or catalytic curing agents with a wide range of flexibilizing and toughening agents.

A

Film Adhesives

49
Q

are used as an alternative to film adhesive. These are often used
to secondary bond repair patches to damaged parts and also used in places where
film adhesive is difficult to apply.

A

Paste Adhesives

50
Q

are about 0.025-inch to 0.10-inch thick sheets of B staged
epoxy.

A

Foaming Adhesives

51
Q

12 Core Materials

A

Honeycomb
Kraft Paper
Thermoplastics
Aluminum
Steel
Specialty Metals
Aramid Paper
Fiberglass
Carbon
Ceramics
Foam
Balsa Wood

52
Q

The most common core material used for aircraft ________
structures is aramid paper (Nomex® or Korex®). Fiberglass is used for higher
strength applications.

A

Honeycomb

53
Q

Relatively low strength, good insulating properties, is available in
large quantities, and has a low cost.

A

Kraft Paper

54
Q

Good insulating properties, good energy absorption and/or
redirection, smooth cell walls, moisture and chemical resistance, are
environmentally compatible, aesthetically pleasing, and have a relatively low cost.

A

Thermoplastic

55
Q

best strength-to-weight ratio and energy absorption, has good heat
transfer properties, electromagnetic shielding properties, has smooth, thin cell
walls, is machinable, and has a relatively low cost.

A

Aluminum

56
Q

Good heat transfer properties, electromagnetic shielding properties, and
heat resistant.

A

Steel

57
Q

Relatively high strength-to- weight ratio, good heat
transfer properties, chemical resistance, and heat resistant to very high
temperatures.

A

Specialty Metals (Titanium)

58
Q

Flame resistant, fire retardant, good insulating properties, low
dielectric properties, and good formability.

A

Aramid Paper

59
Q

Tailorable shear properties by layup, low dielectric properties, good
insulating properties, and good formability.

A

Fiberglass

60
Q

Good dimensional stability and retention, high-temperature property
retention, high stiffness, very low coefficient of thermal expansion, tailorable
thermal conductivity, relatively high shear modulus, and very expensive.

A

Carbon

61
Q

Heat resistant to very high temperatures, good insulating properties, is
available in very small cell sizes, and very expensive.

A

Ceramics

62
Q

used on homebuilts and lighter aircraft to give strength and
shape to wing tips, flight controls, fuselage sections, wings, and wing ribs. These are not commonly used on commercial type aircraft. These are typically
heavier than honeycomb and not as strong.

A

Foam Core

63
Q

a natural wood product with elongated closed cells; it is
available in a variety of grades that correlate to the structural, cosmetic, and
physical characteristics.

A

Balsa Wood

64
Q

Properties of a Core Material

A

High Strength to Weight Ratio
Lightweight
Fire Resistant
Chemical & Weathering Resistant
Color
Translucency
Design Flexibility
Low Thermal Conductivity
Manufacturing Economy

65
Q

Fiber composites are extremely
strong for their weight. By refining
the laminate many characteristics
can be enhanced.

A

High Strength-to-Weight Ratio

66
Q

A standard Fiberglass laminate has a
specific gravity in the region of 1.5,
compared to Alloy of 2.7 or steel of
7.8.

A

Lightweight

67
Q

The ability for composites to
withstand fire has been steadily
improving over the years.

A

Fire Resistant

68
Q

resist the attack of a wide range of
chemicals. Because of this, they are
used in the manufacture of chemical
storage tanks, pipes, chimneys and
ducts, boat hulls and vehicle bodies.

A

Chemical & Weathering Resistant

69
Q

Most are naturally pigmented. Costs
are therefore reduced by no further
finishing or painting. Dark colors are
not recommended which absorbs
excessive heat.

A

Color

70
Q

Polyester resins are widely used to
manufacture translucent mouldings
and sheets. Light transmission of up
to 85% can be achieved.

A

Translucency

71
Q

Because of the versatility of
composites, product design is only
limited by your imagination.

A

Design Flexibility

72
Q

seems to be most competitive or superior to a composite based design in
an aircraft.

A

Aluminum Lithium alloy material

73
Q

Aerospace Aluminum Alloys

A

2014 - Medium strength
2024 - Damage tolerant
2090 - High Strength aluminum lithium alloy
2195 - wieldable, Al-Li Alloy; low temp
2219 - Weld able; low & elevated temp
2618 - elevated temp
6013 - Corrosion Resistant
7010,7050,7055 - High Strength
7075 - High Strength, tough
8009, 8019 - Elevated Temp
8090 - Damage tolerant of Al-Li alloy

74
Q

Comparison of Al-Li Alloy with Composites

A

● Al-Li alloys are more cost-effective, have higher damage tolerance,
and easier manufacturing processes than composites.
● Al-Li alloys are fully recyclable, while composites are practically
non-recyclable.

75
Q

Nano-Technology Applications

A

● Nanotechnology enhances
structures, modifies
surfaces, and provides new
sensor and manufacturing
technologies.
● Advanced aircraft materials
find applications in the
automotive industry for
enhanced durability and
cost-effectiveness.

76
Q

Isotropic vs Anastropic

A

Isotropic material - uniform strength in all directions
Anastropic material – strength in limited number of
directions

BSAeE 2-2 (27 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions