AMCR AIRCRAFT INSPECTION Flashcards
5 Phases of Inspection
Pre-Inspection Phase
Examination Phase
Service and Repair Phase
Functional Phase
Return-to-Service Phase
serves to organize the paperwork, records,
tools, and equipment needed for the
inspection.
Pre-inspection Phase
What are the Pre-inspection Phases
Completion of the work order
Maintenance Records and Aircraft Specification Review
SB and Letters
Airworthiness Directives
Initial Run-up
It is the agreement
between the shop or
mechanic and the owner of
the aircraft concerning the
work to be performed.
Estimates the total cost of
the inspection and any
subsequent maintenance
repair
Work Order
The maintenance history of the aircraft
is carefully examined to determine
repetitive maintenance problems,
airworthiness directive compliance, any
major repairs and alterations done to
the aircraft and, on a base level,
whether the aircraft has had
maintenance performed in a consistent manner
Maintenance Records and Aircraft Specification Review
All aircraft must conform to their
certification requirements. The technician may design a checklist that is specific to the aircraft being inspected, or use a checklist provided by the manufacturer of the aircraft,
engine, propeller, and installed
components as long as it meets the
minimum requirements outlined in 14
CFR part 43 Appendix
D
Maintenance Record and Aircraft Specification Review
This includes the research
and documentation of applicable
service bulletins and service
letters.
Service Bulletins and Letters
Aircraft owners are required to
maintain the current __________ status of their
aircraft and all installed equipment
Airworthiness Directives
This is to perform an engine runup to provide a baseline of engine parameters to compare to the post-inspection run-up indications
Initial Run-up
The primary purpose of the examination
phase is to physically evaluate the
_________ of the aircraft and its
components.
Airworthiness
The actual inspection of the aircraft starts with a _______, which compares the actual aircraft with its certification specifications.
Conformity inspection
After the conformity inspection in examination phase where will it proceed?
looking at, feeling, checking, measuring,
operating, moving, testing, and whatever
else is needed to determine the condition of
the aircraft and its components.
It is used for follow-up repair either during the
inspection or after the completion
of the inspection
Discrepancy list
This includes necessary maintenance
that is required to approve the
aircraft for return to service and to
preserve its airworthy condition.
Service and Repair Phase
In the functional check phase, the
maintenance technician conducts functional or operational checks on the aircraft
and systems, and those are?
■ Post engine inspection run-up
■ Installed systems
*Aircraft Cleaning
