Lighting Flashcards

1
Q
  1. What’s the default for lighting brightness after on ground power up?
A

Day Preset

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q
  1. What happens when Vestibule Override, located under TSC Dimming, is selected?
A

Vestibule and dome lights extinguish.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q
  1. What lights aren’t tested during Annun Test?
A

APU FIRE light, fire handles, fuel control switches, red light in ELT switch panel, and passenger oxygen light.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q
  1. What happens when OVERRIDE pushbutton is selected?
A

Utility lights and side console flood lights illuminate.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q
  1. How many flashlights are in the cockpit?
A

Three: one (1) for captain, one (1) for flight observer and one (1) for copilot.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q
  1. When do No Smoking indicator signs in the cabin come on automatically?
A

During power up; if selected off, they come on when passenger masks are deployed either manually or automatically.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q
  1. Describe the function of Ramp light switch in baggage compartment.
A

It illuminates pylon lights for loading bags and possibly for maintenance related activities: one light shines out from under each pylon.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q
  1. Do utility lights in tail compartment need to be turned OFF prior to exiting the compartment?
A

No, they extinguish when tail compartment door is closed unless the switch in baggage compartment is also selected to ON.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q
  1. What’s the purpose of beacon light?
A

When illuminated, it alerts outside observers that something is powered. During flight, it functions as warning and recognition light.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q
  1. How would you know if nav or strobe light has failed?
A

There’s an amber fault light in light assembly: it illuminates for partial failure to indicate that servicing is required and flashes for complete fault which may affect dispatch.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q
  1. How many wing tip flood lights are there?
A

Two (2) LED lights on each wing tip: one shines forward and one shines downward.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q
  1. When do taxi lights automatically extinguish?
A

Gear retraction

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q
  1. When is use of landing lights recommended?
A

Strongly encouraged for takeoff and landing and during any operations below 10,000’ or within 10 NM of airport.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q
  1. Where can you turn on wheel well lights?
A

Controlled from 2 places: one switch is inside and one outside. Inside: controlled from switch on Exterior Lights page of OHPTS. Outside: controlled from switch on Security / Gnd Svc panel labeled WHEEL WELL LTS. Note: wheel well doors must be open.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q
  1. There are a number of exterior evacuation lights provided to assist passengers while exiting airplane in the dark. Where are they located?
A

Three (3) overwing lights for each wing, two (2) underwing lights mounted on wing to body fairing, and a main entry door light.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly