Hand Tools

Question 0

The purpose of draw filing is to

Answer 0

Produce a smooth and flat surface

Question 1

The width of a sawblade cut into the workpiece is called

Answer 1

Kerf

Question 2

The removable serrated jaws on a bench vice are made from

Answer 2

Hardened steel

Question 3

A standard screwdriver blade maintains a better grip in the slot if the blade is ground slightly?

Answer 3

Concave

Question 4

The included angle that should be ground on the point of a center punch is?

Answer 4

90°

Question 5

Pullers are used to?

Answer 5

Remove bearing hubs and sprockets

Question 6

What is a hacksaw blade pitch

Answer 6

How many teeth per inch

Question 7

What is a 14 pitch blade on hacksaw used for? 18 pitch? 24 pitch? And 32 pitch?

Answer 7

14 pitch played soft, iron, brass, bronze copper and aluminum

18 pitch alloy steel, iron pipe, and light angle iron ( general shop use )

24 pitch used for high carbon steel drill Rod, medium sheet metal and heavy tubing.

32 pitch used for thin sheet-metal and tubing, stainless steels and tool steels

Question 8

What two types of hacksaw blade sets are there?

Answer 8

Straight or alternate set / wavy set

Question 9

When using a hacksaw how many strokes per minute should you take ?

Answer 9

50

Question 10

Name all the parts of a file?

Answer 10

Tang heel face edge point

Question 11

Name the four tooth styles of a file

Answer 11

Single cut, doublecut, rasp, curved

Question 12

Name the six terms of file coarseness ?

Answer 12

Rough, coarse,bastard, second cut, smooth and dead smooth

Question 13

Name the two types of vices

Answer 13

Bench vice and pipe vice

Question 14

Name the parts of a hammer

Answer 14

Handle, eye, post, face, peen

Question 15

What are the 2+ screwdrivers called?

Answer 15

Frearson cross slot, Phillips cross slot

Question 16

What are the 2 - screwdrivers called ?

Answer 16

Cabinet and standard,keystone or slotted

Question 17

What is the screw driver <> that looks like a bow tie called ?

Answer 17

Clutch head

Question 18

When using adjustable wrench what position should be in ?

Answer 18

Position it so the force acts against the solid jaw rather than the movable jaw

Question 19

What are the three types of torque wrenches

Answer 19

Beam type, dial type, click type

Question 20

What are the characteristics of a beam type torque wrench ?

Answer 20

They rely on bend and elasticity of the torque wrench beam

They are useful for measuring rotating torques or preloads

They can be used to torque fasteners and need visual interpretation during use

Question 21

What are the characteristics of a dial type torque wrench

Answer 21

They rely on a mechanical linkage assembly that changes the twisting force at the socket adapter to rotary dial movement near the handle. Contains a movement much like a dial indicator

They are very accurate