Milling

Question 0

What is the maximum depth of cut for an end mill?

Answer 0

Equal to one half the cutter diameter

Question 1

A face mill will produce a surface that is?

Answer 1

Flat and perpendicular to the axis of the spindle

Question 2

What holds a milling machine arbor securely in the spindle?

Answer 2

Draw bolt

Question 3

When the swivel table on a universal milling machine is being re-aligned, how should a magnetic base dial indicator be mounted?

Answer 3

Dial base on the table and pointer on the column. Move the table

Question 4

When a vies is being aligned on the table of a knee and column milling machine, how should a magnet Base dial indicator be mounted?

Answer 4

Dial base on column, pointer on the vice’s solid jaw. Move the table.

Question 5

During what milling operation would you use a backlash eliminator?

Answer 5

For climb milling

Question 6

How is the feed on a milling machine specified?

Answer 6

In inches per minute

Question 7

What transfers the power from the milling machine spindle to the milling cutter?

Answer 7

The drive keys or lugs

Question 8

What types of milling machine arbors are there?

Answer 8

A, B, and C arbors

Question 9

What makes a universal horizontal milling machine different from a plain horizontal milling machine?

Answer 9

The universal milling machines table can swivel

Question 10

What is the taper per foot used on milling machine spindles?

Answer 10

3 1/2 inches per foot