OSHA Training

Question 1

what year was the OSH Act signed into law

Answer 1

1970

Question 2

T/F: employers are not responsible for furnishing each employee a place of employment which is free of recognized hazards

Answer 2

False

Question 3

what is OSHA’s highest inspection priority

Answer 3

Imminent danger

Question 4

what are the 4 main types of OSHA violations

Answer 4

1. Serious
2. Repeated
3. Other-than-serous
4. Willful

Question 5

which of the following would NVR be cited under OSHA’s multi-employer worksite policy?

Answer 5

Controlling

Question 6

Employers must post the 300A summary form

Answer 6

Feb 1st -April 30th

Question 7

The Right To Know is

Answer 7

Having the right to know hazardous materials and conditions on a job site

Question 8

When an employee brings his/her own personal tools, equipment, or personal protective equipment on the job, who is responsible for ensuring the safety of such tools, equipment or personal protective equipment?

Answer 8

The employer

Question 9

Guards on saws should be installed

Answer 9

at all times

Question 10

what is considered conventional fall protection user the Subpart M?

Answer 10

1. Guardrails
2. Personal fall arrest system
   Safety net

Question 11

Which of the following is prohibited on a personal fall arrest system?

Answer 11

Body Belt

Question 12

a controlled access zone consist of

Answer 12

Clearly marked boundaries
sign stating controlled access zone
a person designated as a safety monitor

Question 13

At what height of fall protection requires as specified by the by the Duty to Have Fall Protection Standard?

Answer 13

six feet

Question 14

when are workers allowed to work inside trusses?

Answer 14

After the first 3 trusses are set and braced properly

Question 15

When should stairways/holes be protected

Answer 15

as soon as the hazard is created

Question 16

At what height is fall protection required on scaffolds?

Answer 16

ten feet

Question 17

what material is acceptable for scaffold planks

Answer 17

Plank stamped scaffold rated

Question 18

Scaffold can be erected, moved, dismantled or altered_

Answer 18

under the supervision of a competent person

Question 19

at what elevation should a stairway or ladder be provided at the point of access to a house or work area

Answer 19

19”

Question 20

stairs must have a hand rail or stair rail system when the height and or riser is greater than___

Answer 20

4 or more risers or rising more than 30” which ever is less

Question 21

what is are acceptable systems for cave-in protection in trenches?

Answer 21

sloping, benching, shoring

Question 22

what is the minimum distance a spoil pile must be placed from an excavation?

Answer 22

Two feet

Question 23

benching or sloping of trenches can not be used as a safety requirement in trenches over___ in depth

Answer 23

20 feet

Question 24

It is acceptable to use an extension cord that is missing its gourd pin if:

Answer 24

it is not acceptable to use a cord missing a ground pin

Question 25

T/F: a portable generator must be equipped with GFI protected receptacle or the contractor muse use a GFI protection device before using any electrical tools

Answer 25

True

Question 26

Forklifts may be operated by NVR Project managers

Answer 26

NEVER

Question 27

Crane operators must be:

Answer 27

Certified on the operation of a crane

Question 28

T/F: Backhoe operators must be trained to operate the machine

Answer 28

True

Question 29

Hoses for temporary propane heaters should be inspected

Answer 29

daily

Question 30

Temporary Propane heaters need to be placed on:

Answer 30

1. concrete floors
2. Min of two 4x4 layers of 5/8 fire code drywall
3. pads specifically designed for propane heater use

Question 31

T/F: Propane tanks should never be placed inside of a house

Answer 31

True