Configuration Commands Flashcards
Line vty 1st-vty last-vty
Global command that changes the context to vty configuration mode for the range of vty lines listed in the command.
Line console 0
Global command that changes the context to console configuration mode.
Login
Line (console and vty) configuration mode. Tells IOS to prompt for a password (no username).
Password password value
Line (console and vty) configuration mode. List the password required if the login command (with no other parameters) is configured.
Interface: type port-number
Global command that changes the context to interface mode—for example, interface FastEthernet 0/1.
Hostname: name
Global command that sets this switch’s host name, which is also used as the first part of the switch’s command prompt.
Exit
Moves back to the next higher mode in configuration mode.
End
Exits configuration mode and goes back to enable mode from any of the configuration submodes
Ctrl-Z
This is not a command, but rather a two-key combination (pressing the Ctrl-Z key and the letter Z) that together do the same thing as the end command.