Storage, Handling, and Application of Lubricants

Question 0

Name three methods of applying grease.

Answer 0

Pressure gun
Centralized grease system
Waste pad
Hand packing
Block grease
Electro-lubers

Question 1

What are six important factors to consider in the design of a circulating oil system?

Answer 1

Reservoir capacity, dimensions, locations, materials, baffles; oil flow; temperature; hydraulic fluid; size and positioning of vents; pump type and rating; filter types, ratings and locations; actuator type and size; design of fluid conductors; valve types and orientations.

Question 2

Where should baffles be placed in a reservoir in relation to the inlet and suction line in a lube system?

Answer 2

Between the inlet and suction line

Question 3

In a bulk storage tank, the suction line should be located at least _______ to _______ _______ from the _______ of the tank.

Answer 3

4 to 6 Inches from the bottom of the tank.

Question 4

Name six types of automatic lubricating systems.

Answer 4

Oil mist
Circulating oil
Single line grease
Multiple line grease
Electroluber
Spray

Question 5

Name the major types of lubricants used in and on machine tools.

Answer 5

Coolant
Way lubricant
Hydraulic oil
Grease
Spindle oil
Gear oil

Question 6

What are some correct ways to store oil drums if they must be stored outside?

Answer 6

Store them on their sides or at an angle with the bungs up, use drum lid covers, store under a roof.