437

Question 1

What is the main function of a control system?

Answer 1

Maintain a variable at a setpoint

Question 2

What are the basic components of a control system?

Answer 2

Sensor, controller, controlled device

Question 3

Air conditioning and refrigeration systems are commonly controlled by ___ control

Answer 3

Proportional

Question 4

Which of these control loops adjusts the setpoint automatically?

Answer 4

Reset system

Question 5

The power to operate a control system may come from

Answer 5

Fluid under pressure

Question 6

An RTD responds to a change in temperature by undergoing a change in its

Answer 6

Electrical resistance

Question 7

Relative humidity is defined as the amount of moisture in the air

Answer 7

divided by the amount it can hold

Question 8

In a pressure sensor that uses a Bourdon tube, changes in pressure are sensed by changes in the ______ of the tube

Answer 8

position of sealed end

Question 9

An air-conditioning system has a two-position damper in the duct bringing outside air into the building and a second two-position damper in the return-air duct. When the system shuts down, the outside-air damper should be ______ and the return-air camber should be

Answer 9

Closed, open

Question 10

Which of the following is an advantage of variable-speed drives over older methods of controlling the output of an air-conditioning or refrigeration system?

Answer 10

Proportional control can be used

Question 11

Unlike floating control, the proportional control is

Answer 11

Continuous

Question 12

The air supply for a pneumatic control system requires which of the following?

Answer 12

Drier

Question 13

A PE relay is used to control a device operated by

Answer 13

Electricity

Question 14

Setting the gain of a controller determines how much a change in the ______ affects the ______

Answer 14

controlled variable, controlled device

Question 15

Adding integral action to a controller improves system performance by reducing ______. Adding derivative action improves performance by reducing _______

Answer 15

offset, overshoot and undershoot

Question 16

In pumpdown control, the compressor starts when the pressure ______ in the ______

Answer 16

increases, suction line

Question 17

The high-pressure control in the discharge line of an air-conditioning or refrigeration system responds to high pressure by

Answer 17

shutting down the compressor

Question 18

A differential-pressure oil-safety control shuts off the compressor if the difference in pressure between the ______ and the oil pump _______ does not become high enough within a given time.

Answer 18

compressor crankcase, discharge

Question 19

What kind of capacity control is commonly used on large reciprocating compressors?

Answer 19

Cylinder unloading

Question 20

In modulating the flow of water to hydronic terminals, the temperature control method has the advantage of

Answer 20

preventing system freeze-up in cold weather

Question 21

In setting up a preventive (PM) program, your first step should be to

Answer 21

inspect the system in detall

Question 22

To maintain oil pressure in a 10-hp reciprocating compressor, a _____ oil pump is used

Answer 22

positive-displacement

Question 23

To adjust the water-regulating valve on a water-cooled condenser, you should turn the adjusting screw until the ____ is at the design value. You should make this adjustment when the equipment is running at ______ load

Answer 23

head pressure, maximum

Question 24

The main requirements for maintaining a pneumatic control system Incude

Answer 24

Removing and disassembling valves