Chap_2 Flashcards

1
Q

Customer Premises Equipment (CPE)

A

company uses WAN services from an ISP and uses a device called the CPE by renting or owning it and it is connecting the business to the carrier link.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Data Communications Equipment (DCE)

A

the DCE consists of devices that put data on the local loop. The DCE primarily provides an interface to connect subscribers to a communication link on the WAN cloud. converts user data into a WAN service provider acceptable signal and vice versa.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Data Terminal Equipment (DTE)

A

The customer devices that pass the data from a customer network or host computer for transmission over the WAN. The DTE connects to the local loop through the DCE

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Demarcation Point

A

A point established in a building or complex to separate customer equipment from service provider equipment . The demarcation point is the place where the responsibility for the connection changes from the user to the service provider. When problems arise, it is necessary to determine whether the user or the service provider is responsible for troubleshooting or repair.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Local Loop

A

The actual copper or fiber cable that connects the CPE to the CO of the service provider.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Central Office (CO

A

The CO is the local service provider facility or building that connects the CPE to the provider network.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Toll network

A

This consists of the long-haul, all-digital, fiber-optic communications lines, switches, routers, and other equipment inside the WAN provider network.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Dialup modem

A

converts (i.e., modulates) the digital signals produced by a computer into voice frequencies that can be transmitted over the analog lines of the public telephone network. On the other side of the connection, another modem converts the sounds back into a digital signal (i.e., demodulates) for input to a computer or network connection.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Access server

A

Concentrates dialup modem, dial-in and dial-out user communications. Considered to be a legacy technology, an access server may have a mixture of analog and digital interfaces and support hundreds of simultaneous users.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Broadband modem

A

A type of digital modem used with high-speed DSL or cable Internet service. Both operate in a similar manner to the voiceband modem, but use higher broadband frequencies and transmission speeds.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

CSU/DSU

A

Digital-leased lines require a CSU and a DSU. A CSU/DSU can be a separate device like a modem or it can be an interface on a router. The CSU provides termination for the digital signal and ensures connection integrity through error correction and line monitoring. The DSU converts the line frames into frames that the LAN can interpret and vice versa.
*Channel Service Unit/ Data Service Unit

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

WAN switch

A

A multiport internetworking device used in service provider networks. These devices typically switch traffic, such as Frame Relay or ATM and operate at Layer 2.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Router

A

Provides internetworking and WAN access interface ports that are used to connect to the service provider network. These interfaces may be serial connections, Ethernet, or other WAN interfaces. With some types of WAN interfaces, an external device, such as a DSU/CSU or modem (analog, cable, or DSL), is required to connect the router to the local service provider.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Core router/Multilayer switch

A

A router or multilayer switch that resides within the middle or backbone of the WAN, rather than at its periphery. To fulfill this role, a router or multilayer switch must be able to support multiple telecommunications interfaces of the highest speed used in the WAN core. It must also be able to forward IP packets at full speed on all of those interfaces. The router or multilayer switch must also support the routing protocols being used in the core.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

PSTN

A

public switched telephone networ

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

ISDN

A

Integrated Services Digital Network

17
Q

diff. between circuit switching and packet switching

A

circuit switching: a dedicated connection/ path between two devices is held for all communications (expensive and inefficient).
packet switching: data is encapsulated in packets that can then tracel over any connection to get to the destination and is very efficient. also connections don’t need to be pre-made before sending data.

18
Q

PSN?

A

packet switched network

19
Q

connection less systems?

A

full addressing info must be carried in each packet.Each switch must evaluate the address to determine where to send the packet. An example of a connection-less system is the Internet.

20
Q

Connection-oriented systems ?

A

part of the packet switched network: network predetermines the route for a packet, and each packet only has to carry an identifier. The switch determines the onward route by looking up the identifier in tables held in memory.

21
Q

(VC)

A

When the circuit is established temporarily while a packet is traveling through it, and then breaks down again, it is called a virtual circuit

22
Q

(DLCIs)

A

An example of a connection-oriented system is Frame Relay. In the case of Frame Relay, the identifiers used are called data-link connection identifiers (DLCIs).

23
Q

Integrated Services Digital Network (ISDN)

A

circuit-switching technology that enables the local loop of a PSTN to carry digital signals, resulting in higher capacity switched connections.

24
Q

Integrated Services Digital Network (ISDN)

A

circuit-switching technology that enables the local loop of a PSTN to carry digital signals, resulting in higher capacity switched connections. (**ISDN is a telephone line service)

25
Q

(TA)

A

terminal adapter (TA) which is a device used to connect ISDN Basic Rate Interface (BRI) connections to a router.

26
Q

Basic Rate Interface (BRI

A

intended for the home and small enterprise and provides two 64 kb/s B channels and a 16 kb/s D channel. The BRI D channel is designed for control and often underused, because it has only two B channels to control

27
Q

Primary Rate Interface (PRI)

A

PRI delivers 23 B channels with 64 kb/s and one D channel with 64 kb/s for a total bit rate of up to 1.544 Mb/s. This includes some additional overhead for synchronization. In Europe, Australia, and other parts of the world, ISDN PRI provides 30 B channels and one D channel, for a total bit rate of up to 2.048 Mb/s, including synchronization overhead

28
Q

data-link connection identifier (DLCI)

A

ports virtual circuits on a router (one port can have multiple Virtual Circuits) used by frame relay and are uniquely identified by DLCI numbers.

29
Q

data-link connection identifier (DLCI)

A

ports virtual circuits on a router (one port can have multiple Virtual Circuits) used by frame relay and are uniquely identified by DLCI numbers. allows bi-directional communication.

30
Q

what is Frame Relay?

A

layer 2 non-broadcast multi-access WAN technology. connects enterprise network LAN’s. A single router interface can be used to connect to multiple sites using PVC (virtual circuits)

31
Q

Asynchronous Transfer Mode (ATM

A

technology is capable of transferring voice, video, and data through private and public networks. It is built on a cell-based architecture rather than on a frame-based architecture. 5-byte ATM header followed by 48 bytes of ATM payload. Small, fixed-length cells are well-suited for carrying voice and video traffic because this traffic is intolerant of delay. Video and voice traffic do not have to wait for larger data packets to be transmitted.

32
Q

MPLS?

A

Multiprotocol Label Switching: multiprotocol high-performance WAN technology that directs data from one router to the next, based on short path labels rather than IP network addresses. **is able to carry multiple protocols at the same time like: ipv4, ipv6, dsl, frame-relay..

33
Q

VSAT

A

Very small aperture terminal (VSAT) is a solution that creates a private WAN using satellite communications

34
Q

what are some serial ports used?

A

RS-232 (older type, also called RJ-45) new type is the: USB universal serial bus.
* V.35: used for modem to multiplexer communication. used by most routers and DSU’s (Data service units) to connect to T1 carriers.