Monitor to Line Input Studio B

Question 1

What is monitor to line input used for?

Answer 1

mixing

Question 2

What does monitor to line input mean?

Answer 2

monitor returns (Pro Tools) feed the line inputs on the console

Question 3

What are the two main steps to set up monitor to line input (after setting up the master section, I/O setup, and clocking)?

Answer 3

1. ) set the inputs to line and set the outputs to mix A

2. ) set up stereo track in Pro Tools as your mixdown track

Question 4

How do you set the inputs to line and set the outputs to mix A?

Answer 4

1. ) in the central routing section, wake up the channel select by pressing + and - together
2. ) press SELECT, then ALL to select all channels on the console (should see a green highlight on the TFT display around every channel)
3. ) in the row labeled CHANNEL IN, select LINE
4. ) in BUS ROUTING, select MIX A
5. ) in CHANNEL METERS, select MON RETURN to set Duality meters to show the outputs from Pro Tools

Question 5

How do you set up a stereo track in Pro Tools as your mixdown track (routing)?

Answer 5

1. ) create a new stereo track in Pro Tools and move it to the far right of the mix window
2. ) name the track the name of the song you’re going to mix
3. ) set the inputs and outputs of the track to Rosetta 1-2
4. ) record enable the track and select input monitoring

Question 6

What should you do if you don’t hear anything while mixing?

Answer 6

double check the set up of the master section

Question 7

What is the basic signal flow for monitor to line input?

Answer 7

DAW Outputs -> Console Line Inputs -> Processors -> Fader -> Pan -> Mix A