API 570 data sheets - key words/ Services Flashcards
Define - repair
Restore- suitable
570: 3.78
Define - alteration
Physical change
570: 3.1.2
Define - Imperfection that exceeds an acceptable criteria
Defect
570: 3.1.17
Define - Discontinuity that may or may not exceed the acceptance criteria
Imperfection
570: 3.1.30
Define - RBI’s Two primary factors
Probability and consequence
570: 5.2
NDE - Number of CML’s to obtain thickness readings during inspections
Representative
570: 6.5
NDE - CML that must be measured during a thickness Inspection
CML w/ earliest renewal date
570: 6.5
PRD’S - How relief device intervals are determined
Performance
570: 6.7.3.1
Inspection - Basis of API 570’s Piping Classification
Consequence of Failure
570: 6.3.1
Corrosion - Method by which process leaks can be lead to brittle failure
Auto-refrigeration
570: 6.3.1
Corrosion - Cause for fatigue crack
Cyclic Stress
574: 7.4.10.1
Corrosion - Factors that affect the creep rate
TIME, TEMPERATURE & STRESS
574: 7.4.11.1
CORROSION - Type of soil that is most corrosive
Low Resistivity
570: 9.2.4
Repairs - # of new flange assemblies to be inspected during repairs and alterations
Representative
570: 5.12
SCC can develop at hot spots, including where the heat tracing attaches to pipe
Caustic
574: 7.4.6.2.n