ASE/AAG

Question 1

where are the AN/APR -39 radar warning receiver (rwr) digital processor located in the aircraft?

Answer 1

left avionics bay

Question 2

which component provides radar, laser, and missile threat audio to the crewmembers?

Answer 2

CIU (communication Interface Unit

Question 3

where are RWR, LWR, and MWS detected threats displayed on the ASE and TSD pages of the mpd?

Answer 3

ASE threat symbols are always displayed on the inside of the ASE footprint

Question 4

when will an ASE footprint be displayed on the TSD page?

Answer 4

when ASE threats are selected for presentation from the TSD THRT/SHOW page and at least one threat exists for display

Question 5

How may the AN/APR39A RWR be declassified?

Answer 5

remove the UDM (user data module)

Question 6

what is the purpose of the blade antenna within the rwr system?

Answer 6

receives C/D band radio frequency energy and routes it to the digital processor

Question 7

what indication does the rwr provide if the received threat detection does not match a stored threat in the EID file?

Answer 7

A ‘U’ will be displayed

Question 8

how can the crew identify the system’s #1 priority ASE emitter when looking at the ASE or TSD pages?

Answer 8

the emitter will have a home plate symbol surrounding it

Question 9

Which component contains the classified operational software required for tactical operation of the of the laser detection set LWR?

Answer 9

The UDM

Question 10

What three threats are detected by the LDS/LWR?

Answer 10

Beam rider, designator, range finder

Question 11

How many degrees of detection are provided by the LSD LWR in elevation?

Answer 11

+/- 45 *

Question 12

How many degrees of detection are provided by the LSD/LWR in azimuth?

Answer 12

360

Question 13

The AN/AVR-2B laser detector set/ LWR is designed to operate in conjunction with which other ASE system?

Answer 13

APR-39 RSDS / RWR

Question 14

The RFI gives the crew 360 degrees coverage. What numeric values define the Fine Area?

Answer 14

90, 45 degrees either side of FCR center line

Question 15

What is the primary difference between the fine area and course areas of coverage?

Answer 15

Azimuth accuracy is better with fine

Question 16

What 3 types of radar system can the RFI detect?

Answer 16

Pulse, pulse Doppler, continuous wave

Question 17

What is the primary function of the RFI system?

Answer 17

Offensive system, with target cueing for employment of weapons

Question 18

What. Identifies an emitter that has been detected in the fine area of coverage?

Answer 18

Triangle in bottom of symbology

Question 19

On what three FCR operational modes will RFI icons be displayed?

Answer 19

GTM RMAP ATM

Question 20

How many RFI emitters can be displayed in the ASE, TSD, FCR pages?

Answer 20

10

Question 21

What symbology indicates an MRFI intermittent solution?

Answer 21

A line with chevrons

Question 22

What 2 conditions can MRFI be installed?

Answer 22

FCR pinned, URX

Question 23

Advantage if MRFI over RFI?

Answer 23

has passive locations of threats

Question 24

How many ASE emitters on FCR page?

Answer 24

None

Question 25

In which sight will the RFI emitters not be selectable to CAQ?

Answer 25

FCR

Question 26

What 2 pages are used to enable the RFI system if it is installed?

Answer 26

FCR UTIL, WPN UTIL

Question 27

How can the crew select a non-priority RFI threat to conduct a cued search?

Answer 27

Resolved cued search button, or curser select

Question 28

How is manual cued search performed?

Answer 28

An emitter is selected from FCR page A single scan is initiated

Question 29

What indication does the crew receive if an emitter has been merged?

Answer 29

The RGI icon will appear as FCR NTS

Question 30

CUED search with LHG, Airborne type emitter, and FCR is in TMP mode?

Answer 30

ATM mode with narrow field of view

Question 31

What is the function of the CMWS system?

Answer 31

Detect and counteract IR missile threats

Question 32

What is the primary processor for LWR, RWR, CMWA?

Answer 32

AGP

Question 33

What component houses the UDM for CMWS?

Answer 33

ECU

Question 34

How can the the CMWS be safed in addition to the arm/safe button on ASE page?

Answer 34

Squat switch, safety pin

Question 35

Where are the HFI detects displayed on the ASE page?

Answer 35

Inner ring of ASE footprint

Question 36

Can sights and weapons be cued immediately to the azimuth of treat?

Answer 36

Yes

Question 37

2. MWS threats that CMWS declares hostile fine?

Answer 37

Gun fire, RPG

Question 38

The ASE auto store only applies to which type ASE point?

Answer 38

Geo located & MRFI

Question 39

How many ASE geolocated points be stored in COORD?

Answer 39

60

Question 40

What do bearing lines indicate?

Answer 40

Pairs of geo located ASE threat with detecting platform

Question 41

What capabilities are lost with ASE BACKUP?

Answer 41

No threat audio or visual, no inventory or fault status

Question 42

What capabilities will be lost in a CMDS BYOASS?

Answer 42

No auto dispense

Question 43

3 CMDS status indications on CM inhibit status window

Answer 43

Arm Safe Pin

Question 44

Where are the manual dispense controls located for CMWS?

Answer 44

Cyclic stick

Question 45

CIRCM may lase missile regardless if CMWS declares threat?

Answer 45

True

Question 46

How does crewmember arm laser for CIRCM?

Answer 46

RJAM. on ASE page

Question 47

What indication CIRCM is lasing?

Answer 47

Lightning bolt on own ship

Question 48

How can the m206 and m211 munitions be identified?

Answer 48

206 has red cap 211 gray sealant

Question 49

How is payload module installed in dispenser?

Answer 49

Red, down ,out

Question 50

4 major components of AAG?

Answer 50

My band antenna RFE (Radio frequency electrolics) ROVER Thermite

Question 51

AAG requires how long to warm up?

Answer 51

2-2.5

Question 52

AAG system can transmit— video sources and receive up to — video sources?

Answer 52

2 4

Question 53

What indication does the aircrew have that AAG system is not installed?

Answer 53

AAG NOT INSTALLED message on AAG pages

Question 54

The transmitting AAG aircraft must select -x— in order to get position and range displayed?

Answer 54

Metadata

Question 55

The MODE button selection allows the crew member to transmit video/media in AIR or GRND mode?

Answer 55

True

Question 56

When storing TGT/cm + clips the clip is created - — seconds before and -x—— seconds after the selecting

Answer 56

5 35

Question 57

In the AAG Los data field, bearing indicates the magnetic bearing from ownship to the AAG Los of the tuned member

Answer 57

True

Question 58

To PAN to the AAG tuned member, select POINT and enter -$— in the keyboard?

Answer 58

AAG

Question 59

When the TADS is slaved to the AAG acquisition source the TADS is viewing the tuned member”s LOS?

Answer 59

True

Question 60

The waveform chosen by the crew to receive data must match the waveform of the transmitting aircraft.?

Answer 60

True

Question 61

What level of control is only available with Upper Receiver?

Answer 61

Level 2

Question 62

What are the components of the upper receiver system?

Answer 62

Omni directional antenna, thermite, UR ROVER

Question 63

Which bands does Omni directional antenna receive?

Answer 63

L band, c band, s band, and Ku band

Question 64

How long does the thermite take to power up?

Answer 64

2 min

Question 65

Will the TDU display UR video?

Answer 65

No

Question 66

The aircrew accesses the UR page through FAB -X XXXX?

Answer 66

FCR

Question 67

UR preset conditions are established via the _____ program?

Answer 67

AMPS

Question 68

The UR processor powers up in approx_____ minutes

Answer 68

2 minutes