builder advanced ch5 Flashcards Preview

NAVY BU1 > builder advanced ch5 > Flashcards

Flashcards in builder advanced ch5 Deck (25)
Loading flashcards...
1

TRUE/FALSE
When taking over an established shop, you should NOT make a survey of shop equipment.

False

2

TRUE/FALSE
The function of a shop has an important bearing on the space and equipment needed.

True

3

You should refer to all the Occupational Safety and Health Standards for the Construction Industry, Code of Federal Regulations (29 CFR Part 1910) for what type of information?

Storage of tools, material, and equipment

4

TRUE/FALSE
You should ensure that your storage facilities are arranged to provide as much working space as possible.

True

5

What type of flooring material is unfortunately used most often by industrial shops?

Concrete

6

What type of floor material is preferred for shops?

Wood

7

As a general rule, windows should be installed at what minimum height in inches above the floor?

54 inches

8

What number of feet above the floor is considered the minimum height for the ceiling of a shop?

12 feet

9

Shaped items of wood that are usually made from well seasoned kiln-dried lumber (with 4 to 9 percent moisture content) are known by what term?

Millwork

10

Which of the following units is NOT a form of setup millwork?
-prehung doors
-molding
-doorframes
-cabinets

Doorframes

11

Which of the following units are NOT a form of knocked down millwork?
-stairs
-window frames
-doorframes
-cabinets

Cabinets

12

TRUE/FALSE
The Architectural Graphics Standard provides complete information on drawings.

True

13

TRUE/FALSE
When developing working drawings, you do NOT have to follow drafting standards closely.

False

14

Which of the following units are NOT an example of casework construction?
-desks
-chests
-bookcases
-window frames

Window frames

15

Which of the following techniques is most often used to strengthen a shelf?
-installing strongbacks
-adding additional nails
-adding thick wood blocks
-installing additional face frames

Installing strongbacks

16

The toeboard is usually set back how many inches from the face of a case?

2 1/2 to 3 inches

17

What are the dimensions in inches of a standard kitchen counter top, in height, depth, and thickness?

36 by 25 by 1 1/2

18

Which of the following joints should NOT be used to fasten together the stiles and rails in a cabinet?
-dado
-rabbet
-spline miter
-Glue

Glue

19

After marking the location of a stud in a wall unit, how many inches should you measure in both directions to locate the next studs?

16

20

In addition to the lock shouldered and square shouldered methods of building drawers, you can also use what other method?

Multiple dovetail

21

TRUE/FALSE
Drawer dimensions are usually given as with, height, and depth, in the order.

True

22

What type of cabinet door is the most difficult to construct?

Flush

23

If a cabinet door is 36 inches in length, you should attach a total of mow many 2 inch hinges?

Three

24

Formica, Micarta, Texolite, Wilson Art, and Melamite are trade names for what type of material?

Laminates

25

TRUE/FALSE
Polyvinyl resin (white glue), is stronger than aliphatic resin (yellow glue).

False