CCNP2 Flashcards
(53 cards)
Which data format is used to describe the list of interfaces?
XML, YAML, JSON, YANG
What two pieces of information are indicated from the exhibited output regarding Switch SW-A?
There is a risk that the switch may cause incorrect VLAN information to be sent through the domain.
This switch will update its VLAN configuration when VLAN changes are made on a VTP server in the same domain.
Which two mode combinations would result in the successful negotiation of an EtherChannel?
auto; auto, active; passive, active; on, passive; auto, desirable; active, desirable; desirable
Which entry should be seen in the ARP table on Host1 to gain connectivity to the Internet?
the virtual IP address of the HSRP group 1 and the MAC address of R1
What is the purpose of the command standby 10 track 1 decrement 20 on an SVI of a multilayer switch?
It creates a tracked object against the interface line protocol and links the HSRP instance to the tracked object so that the priority decrements by 20 if that interface goes down.
For which autonomous system would running BGP not be appropriate?
65003
Which network matches the ACE permit ip 10.0.32.0 0.0.31.0 255.255.255.0 0.0.0.192?
10.0.31.0/26
How does an RP MA announcement provide redundancy in a PIM domain configured with the auto-RP mechanism?
RP MA announcements contain elected RPs and group to RP mappings to ensure changes are detected and an election held if necessary.
Which two statements describe characteristics of shared trees for PIM distribution?
A shared tree has a mandatory rendezvous point, A shared tree places an (*,G) entry in the multicast routing table of each router.
What is the cause of BPDU guard not being activated on all access ports?
PortFast is not configured on all access ports.
Which change should be made to the static route command so that traffic will only use the OSPF link when it is up?
Change the administrative distance to 120.
Which three functions are performed at the distribution layer of the hierarchical network model?
transports large amounts of data between different geographic sites, forwards traffic that is destined for other networks, isolates network problems to prevent them from affecting the core layer
Which trunk link will not forward any traffic after the root bridge election process is complete?
Trunk2
Which WLAN security protocol avoids attacks by strengthening the key exchange between clients and APs?
WPA3-Personal
What is the reason for a network engineer to alter the default reference bandwidth parameter when configuring OSPF?
to more accurately reflect the cost of links greater than 100 Mb/s
What is the Cisco Embedded Event Manager?
It is a Cisco IOS tool that allows engineers to build task automation software applets.
What is JSON?
It is a data format for storing and transporting data.
What can be concluded about network 192.168.4.0 in the R2 routing table?
The network was learned from a router within the same area as R2.
Which statement is correct based on the command output regarding Switch_2 in the STP election?
The STP instance on Switch_2 is using the default STP priority and the election is based on Switch_2 MAC address.
What is the function of a QoS trust boundary?
A trust boundary identifies which devices trust the marking on packets that enter a network.
What is a purpose of the OSPFv3 type 8 and type 9 LSAs?
advertise default and external routes learned from other protocols
Which authentication protocol is server-based and preferred for device access control?
802.1x
What is a characteristic of TACACS+?
TACACS+ provides authorization of router commands on a per-user or per-group basis.
Which two options best describe an exterior routing protocol (EGP)?
a routing protocol that exchanges routing information between different autonomous systems
