Chapter 10 practice test Flashcards Preview

CWI CHP Practice tests > Chapter 10 practice test > Flashcards

Flashcards in Chapter 10 practice test Deck (30)
Loading flashcards...
1

Which of the following nondestructive testing methods are limited to the detection of surface
discontinuities?

a. visual
b. penetrant
c. radiographic
d. a and b above
e. b and c above

d. a and b above

2

To be most effective, visual inspection should be performed when?
a. before welding
b. during welding
c. after welding
d. all of the above
e. none of the above

d. all of the above

3

The time period during which the penetrant remains on the surface of the part allowing it to be drawn into any surface discontinuities is called what?
a. waiting time
b. penetrating time
c. soak time
d. dwell time
e. none of the above

d. dwell time

4

Which type of magnetizing current provides the best iron particle mobility?
a. AC
b. DC
c. DCEP
d. b and c above
e. all of the above

a. AC

5

What MT technique could be used for the discovery of longitudinal flaws?
a. head shot (circular magnetism)
b. side shot
c. coil shot (longitudinal magnetization)
d. a and b above
e. b and c above

a. head shot (circular magnetism)

6

Q 10-5 Which of the following magnetizing methods produce a circular magnetic field in the test
piece?
a. head shot
b. passing an electical current through the part
c. prod
d. all of the above
e. none of the above

d. all of the above

7

Which of the following magnetizing methods can produce a longitudinal magnetic field in the test pieces

a. head shot
b. coil shot
c. yoke
d. a and b above
e. b and c above

e. b and c above

8

What NDT method is best for evaluating subsurface porosity?
a. PT
b. MT
c. RT
d. VT
e. all of the above

c. RT

9

Which of the following statements is correct for radiographic testing?
a. A reduction in thickness will produce a lighter image on the film.
b. A low density discontinuity will produce a lighter image on the film.
c. A high density discontinuity will produce a lighter image on the film. - - 7
d. a and b above
e. b and c above

c. A high density discontinuity will produce a lighter image on the film. - - 7

10

Radiographic testing (RT) can be performed using which of the following?
a. x-ray machine
b. Cesium 137
c. Iridium 192
d. Cobalt 60
e. all of the above

e. all of the above

11

MT can be used most effectively to inspect which of the following?
a. austenitic stainless steel welds on carbon steel
b. austenitic stainless steel welds on stainless steel
c. carbon steel welds on carbon steel
d. a and b above
e. b and c above

c. carbon steel welds on carbon steel

12

Which of the following discontinuities will not usually be revealed using RT?
a. crack
b. incomplete joint penetration
c. porosity
d. lamination
e. none of the above

d. lamination

13

What device is used during radiography to indicate the resolution sensitivity of a radiograph?
a. IQI
b. dosimeter
c. lead screen
d. all of the above
e. none of the above

a. IQI

14

Which nondestructive test method uses sound energy as a probing medium?
MT
RT
UT
PT
ET

UT

15

The process whereby ultrasonic indications are related to dimensions in a test standard is
referred to as?
a. setup
b. calibration
c. standardization
d. synchronization
e. none of the above

b. calibration

16

As-welded groove welds are usually inspected ultrasonically using what technique?
a. straight beam
b. shear wave
c. angle beam
d. b and c above
e. all of the above

d. b and c above

17

Capillary action plays a role in which NDT method?
a. ET
b. UT
c. RT
d. PT
e. MT

d. PT

18

Which NDT method is considered to be a true volumetric test?
a. RT
b. UT
c. PT
d. MT
e. ET

b. UT

19

Which NDT method uses an alternating current coil?
a. MT
b. UT
c. ET
d. a and c above
e. b and c above

d. a and c above

20

Changes in heat treatment can be measured using which NDT method?
a. ET
b. RT
c. MT
d. UT
e. none of the above

a. ET

21

Which of the following NDT methods can detect surface cracks?
a. RT
b. VT
c. ET
d. PT
e. all of the above

e. all of the above

22

Which NDT method is most likely to reveal subsurface laminations in a rolled plate?
a. RT
b. UT
c. ET
d. MT
e. none of the above

b. UT

23

Piezoelectricity is a property used by which NDE method?
a. ET
b. UT
c. RT
d. a and b above
e. b and c above

b. UT

24

Which is the best technique for orienting magnetic lines of force when conducting MT testing?
a. two directions
b. single direction
c. residual magnetism
d. all of the above
e. none of the above

a. two directions

25

What resolution sensitivity is normally required for RT?
a. 2%
b. 4%
c. 5%
d. 7%
e. 9%

a. 2%

26

What is the basic element of evaluation in any quality control program?
a. radiographic testing
b. penetrant testing
c. visual inspection
d. all of the above
e. none of the above

c. visual inspection

27

When should the applicable job documents be reviewed?
a. after the job is completed
b. before welding begins
c. at any time when information is necessary
d. a and b above
e. b and c above

e. b and c above

28

What is the role of the AWS CWI in NDE?
a. see that inspections are done
b. verify personnel qualifications for NDE inspection
c. prepare proper records
d. see that proper records are maintained
e. all of the above

e. all of the above

29

A number to the right of a nondestructive testing symbol refers to the:
a. number of tests to perform
b. the length of weld to be tested
c. the applicable quality standard
d. the test procedure to use
e. none of the above

b. the length of weld to be tested

30

Test information above the reference line refers to the arrow side.
a. true
b. false

b. false