Design Registry/documentation Flashcards
What documents are required for the commercial/industrial gas equipment design registration
Venting design
Complete valve train drawing
Electrical and control schematics
In the case of a boiler fuel system, what information must be submitted to the provincial safety manager upon request?
Schematic drawings and logic data of the fuel system
What is required for a gas appliance to be legally sold, installed, or operated in British Columbia?
It must be certified or approved and display a mark or label.
What must a gas contractor obtain after registering a gas appliance design in order to allow for a field approval assessment by a gas safety officer?
A product approval and installation permit
What is included in the design registration process for automated control systems according to regulation 84.1
Approval from a professional engineer, design specifications, and additional information by the provincial safety manager upon
What is a prerequisite to obtaining a product approval for an unapproved gas appliance under the CSA 149.3 standard?
Obtaining a design registration with TSBC
What is the primary purpose of design registration with technical safety BC?
To review and register a design of a regulated product or installation for certain technologies
What gas systems require design registration under the Safety Standards Act and Gas Safety Regulation?
Industrial and commercial gas systems using NG, Propane, and Hydrogen
What must happen if a provincial safety manager finds a registered automated control system design to be defective?
Design must be revised, and installation or use is halted until revisions are approved
What must happen before a non certified gas appliance can be placed into operation
Must have label or mark as detailed in section 31 of the Gas Safety Regulations
What type of log must be used to record maintenance on steam boilers?
Dedicated hard bound logbook
What document must be provided along with operator training?
As built diagrams
What must be done to logbooks used for maintenance
They must be hard blind and kept for 7 years at least
Who is responsible for performing chemical tests related to boiler systems
The chemical company or trained personnel
What is forbidden to be written in logbooks
Foul and abusive language
What kind of training may be required for onsite personnel for system maintenance
Apprenticeship or journeyman training
What should maintenance records include
Detailed notes of maintenance activities
Who is responsible for instructing the user on the safe and correct operation of appliances or equipment installed
The installer
What is the installer required to do regarding the manufacturers instructions for appliances
Leave the instructions with the user
What kind of maintenance training is recommended for steam
Boiler systems?
Quarterly tuning by a qualified technician
