EOB Questions CH.1

Question 0

What part of the screwdriver fits into the slot of the screwdriver?

Answer 0

End

Question 1

What hammer is most commonly used by the ABH?

Answer 1

Ball peen hammer

Question 2

For a proper fit the Phillips head blade should fill what percent of the screw cavity?

Answer 2

100%

Question 3

For a proper fit the standard head blade should fill what percent of the screw cavity?

Answer 3

75%

Question 4

Bolt cutters are made lengths from?

Answer 4

18” to 36”

Question 5

When bolt cutters are brought together rapidly, sometimes a bolt head or piece of rod being cut off will…

Answer 5

Fly

Question 6

Hacksaws are manufactured to cut what?

Answer 6

Metal

Question 7

What adjustable pipe wrench is used on soft metals such as brass?

Answer 7

Strap

Question 8

What tool is sometimes called the all-purpose tool?

Answer 8

Wrecking bar

Question 9

What type of material is the strap on the strap wrench made of?

Answer 9

Nylon

Question 10

What are designed for prying boards from crates, for pulling spikes or heavy nails, and as a lever for moving heavy objects short distances?

Answer 10

Wrecking bar

Question 11

With the proper attachment, which power tool can be used for buffering small items?

Answer 11

Pneumatic sander

Question 12

The chuck key is usually secured to the electric cord within how many inches from the drill itself?

Answer 12

18”

Question 13

When making a small starting point on the object to be drilled, utilization of what tool will prevent the drill bit from bouncing or slipping away?

Answer 13

Awl

Question 14

The average size disc sander used in the navy is…

Answer 14

7” or 9”

Question 15

The Italy impact scaler is a scaling and chipping tool. It is sometimes called a (n)

Answer 15

Jitterbug

Question 16

Proper use of common power tools is discussed in detail in what chapter of tools and their uses, NAVEDTRA 14256?

Answer 16

Chapter 52

Question 17

Where exact measurements are required, what measuring tool is used?

Answer 17

Caliper

Question 18

Generally a rule has how many sets of graduations?

Answer 18

4

Question 19

On flexible-rigid tapes, what is provided at one end to hook over the object being measured so you can handle it without assistance?

Answer 19

Hook

Question 20

When not in use, rules and tapes should preferably be kept in a…

Answer 20

Wooden box

Question 21

Why should rules and tapes be kept lightly oiled?

Answer 21

Prevents rusting

Question 22

A dynamometer is an apparatus used for measuring what?

Answer 22

Force and energy

Question 23

Uses for the dynamometer may include determining the breaking strength of what item on flight or hangar decks?

Answer 23

Pad eyes

Question 24

Prior to the use of any portable electric tools, you should make sure the tools have a current what?

Answer 24

Inspection mark

Question 25

Before plugging in any tool, be sure the tool is what?

Answer 25

Turned off

Question 26

When any defected electrical tools are noted, the tools should be

Answer 26

Turned in to the electrical shop

Question 27

Leaking or defective air hoses should be

Answer 27

Removed from service

Question 28

Extension cords should be longer than 25 feet in length except when used in

Answer 28

Repair lockers

Question 29

Electric tools of all types used in the navy are required to have

Answer 29

Warning tag

Question 30

Which of the following should NOT be worn around rotating machinery?

Answer 30

Bracelets

Question 31

When it is necessary to work with portable electrical tools or equipment in damp locations, what PPE must be worn?

Answer 31

Electric grade insulated gloves

Question 32

When is wearing head protection mandatory?

Answer 32

Working on the flight deck

Question 33

What is the largest line issued by the navy for general shipboard use?

Answer 33

16"

Question 34

Nylon will part when stretched more than...

Answer 34

50%

Question 35

What knot is used to secure tag lines during aircraft-hoisting operations?

Answer 35

Bowline

Question 36

What is the purpose of the block and tackle?

Answer 36

Gain mechanical advantage

Question 37

The part of the block and tackle that runs through the sheave is called the

Answer 37

Fall?

Question 38

When stowing equipment, which tool should not be locked up?

Answer 38

Emergency equipment