flapless circuit patterns Flashcards
(8 cards)
what speeds are required with a flapless landing
speed 5kts faster on each leg
getting close to the 45 degree marking past the runway what are the procedures needed to made before turning base
Cpast
Carburettor out
power 1300 rpm
attitude higher, 3 fingers
speed 80
trim on turn
what needs to be maintained on base
80kts
3 finger attitude
radio calls
Speed should be from base to final
75kts-70kts
you’ve drifted a little to the right due to wind direction
what need to be done to get back on center line
left aileron, left rudder, to straighten out opposite inputs but gently
What checks need to be maintain to keep on the runway
ACAP
Aim point Aileron use
centerline, rudder use
airspeed should be 70kts
profile 1/3 of the windscreen
with high amounts of energy over the runway what inputs need to be made to have a safe landing
gentle back pressure for every time the aircraft wants to sink