Hardware and Adhesives

Question 1

The metal tools for fastening and fittings used in construction.

Answer 1

Hardware

Question 2

Metal fittings that are concealed in a finished construction.

Answer 2

Rough Hardware

Question 3

Exposed hardware serving as decorative as well as a utilitarian purpose.

Answer 3

Finish Hardware

Question 4

Another term for Finish Hardware.

Answer 4

Architectural Hardware

Question 5

A jointed device, usually consisting of two leaves joined together by a pin, on which a door, gate or shutter swings, turns or moves.

Answer 5

Hinge

Question 6

A type of hinge which consist of two leaves with an odd number of knuckles on one leaf and an even knuckles on the other.

Answer 6

Butt Hinge

Question 7

A type of hinge that closes by itself.

Answer 7

Gravity Hinge

Question 8

A hinge having a knuckle formed from half of each leaf, with the upper half removable from the pin.

Answer 8

Loose Joint Hinge

Question 9

A pin or bolt on which something turns, as the gudgeon of a hinge.

Answer 9

Pintle

Question 10

A socket for the pintle of the hinge.

Answer 10

Gudgeon

Question 11

A hinge containing a coil spring in its barrel for closing a door automatically.

Answer 11

Spring Hinge

Question 12

A hinge permitting a door to swing in either direction.

Answer 12

Double Acting Hinge

Question 13

A long, narrow hinge that runs the full length of the two surfaces to which its leaves are joined.

Answer 13

Piano Hinge

Question 14

Another term for Piano Hinge.

Answer 14

Continuous Hinge

Question 15

Hinge having two long leaves for securing to the adjacent faces of a door and doorjamb.

Answer 15

Strap Hinge

Question 16

A T-Shaped strap hinge with the crosspiece as the stationary member and the long stem being the movable leaf.

Answer 16

Cross Garnet Hinge

Question 17

Another term for Cross Garnet Hinge.

Answer 17

T-Hinge

Question 18

A strap hinge having leaves which are narrower at their junction than at their other extremities.

Answer 18

Dovetail Hinge

Question 19

An H-shaped hinge having a protruding knuckle so that a door can stand away from the wall when they fully open.

Answer 19

Parliament Hinge

Question 20

A hinge having a single, pivoting joint with cylindrical knuckle.

Answer 20

Paumelle

Question 21

A paumelle having an oval shaped knuckle.

Answer 21

Olive Knuckle Hinge

Question 22

A hinge consisting of a number of flat plates rotating about a central pin, with shoulders mortised into a door edge and door frame so as to conceal when closed.

Answer 22

Invisible Hinge

Question 23

A device for securing a door, drawer or lid in position when closed, consisting of a bolt or combination of bolts propelled and withdrawn by a key or combination -operated mechanism.

Answer 23

Lock

Question 24

An assembly of parts making up a complete locking system including knobs, plates and a locking mechanism.

Answer 24

Lockset

Question 25

Only holds the door in place with no provision for locking.

Answer 25

Latchset

Question 26

A type of door lock; the bolt which is square in cross section, is operated by the door key or a turn piece.

Answer 26

Dead Bolt

Question 27

Simply designed lockset which is locked from the inside by pushing, without a key, a universal button.

Answer 27

Toilet Lockset

Question 28

A hole in a lock case or escutcheon for inserting a key.

Answer 28

Keyhole

Question 29

An ornamental plate surrounding the shaft of a door knob at the face of a door.

Answer 29

Rose

Question 30

The edge plat or surface through which the bolt of a lock passes.

Answer 30

Faceplate

Question 31

Another term for faceplate.

Answer 31

Selvage

Question 32

A lock housed within two holes bored at right angles to each other, one through the face of a door and the other in the door edge.

Answer 32

Cylindrical Lock

Question 33

A handle, more or less, spherical, usually for operating a lock.

Answer 33

Knob

Question 34

A round disk or plate fastened to the face of a door around the hole in the door through which the doorknob spindle passes.

Answer 34

Knob Rose

Question 35

A protective plate surrounding the keyhole.

Answer 35

Escutcheon

Question 36

A metal plate or box which is set in a doorjamb and is either pierced or recessed to receive the bolt or latch of a lock, fixed on a door.

Answer 36

Strike plate

Question 37

The projection from the side of a strike plate which the bolt of the lock strikes first.

Answer 37

Lip Strike

Question 38

Devices that automatically return the door to its closed position after it is opened.

Answer 38

Closers

Question 39

Provides an alternative way to hang doors where the visual appearance of hinges is objectionable; it may be center hung or offset.

Answer 39

Pivots

Question 40

Push bars extending across the width of the door.

Answer 40

Panic Hardware

Question 41

Small metal fabrications with rubber bumpers.

Answer 41

Door stops/bumpers

Question 42

Vertical members used between double doors to seal the opening.

Answer 42

Astragals

Question 43

Small pieces of metal having one end pointed and the other enlarged.

Answer 43

Nails

Question 44

Nails sizes are designated by the term...

Answer 44

Penny

Question 45

The body of a nail.

Answer 45

Shaft

Question 46

Nailing in which the nails are driven perpendicular to the face of the material.

Answer 46

Face Nailing

Question 47

Also called concealed or secret nailing. Nailing in such a way that the nail heads are not visible on the face of the work.

Answer 47

Blind Nailing

Question 48

Also called skew or tusk nailing. Nailing obliquely to the surfaces being joint.

Answer 48

Toe Nailing

Question 49

Metal fasteners having tapered, helically threaded shanks and slotted heads designated to be driven to woods by turning.

Answer 49

Screws

Question 50

A bolt having a squae head and a thin, coarse-pitched thread.

Answer 50

Lag screw

Question 51

An anchor having a metal shell with a screw along its axis. Locally called a 'tox screw' with a plastic shell.

Answer 51

Screw Anchors

Question 52

A screw used to fasten metal roofing sheets to the purlins.

Answer 52

Tekscrew

Question 53

Have small projections that are progressively flattened as a bolt is tightened.

Answer 53

Load indicating washers

Question 54

Is a trademark for a brand of expansion bolt having a split, sleevelike sheath.

Answer 54

Molly

Question 55

Bolts with two hinged wings that close against a spring when passing through a whole.

Answer 55

Toggle Bolts

Question 56

Metal pins that are used for permanently joining two or more structural steel members by passing a headed shank through a hole.

Answer 56

Rivets

Question 57

May be solid, liquid or powdered used to bond surfaces together.

Answer 57

Adhesives

Question 58

Known as white glue, water based and dries quickly.

Answer 58

Polyvinyl/PVA Glue

Question 59

A very popular and most common PVA glue. Effectively used as wood glue.

Answer 59

Stickwel

Question 60

A high-strength adhesive.

Answer 60

Epoxy