Ifsta Chapter 2

Question 1

Per NFPA 1002 the driver/operator is required to preform routine tests, inspections, and service on
which of the following

Answer 1

A) Electrical systems, steering systems, tools, appliances, equipment, batteries, braking systems, fuel
systems, hydraulic fluids, oil, tires, belts

Question 2

What two types of inspections are preformed during the Circle or Walk around Method

Answer 2

B) Operational Readiness and the vehicle pretrip worthiness inspection

Question 3

What is the NFPA Standard for Emergency Vehicle Technician Professional Qualifications?

Answer 3

1071

Question 4

Which NFPA standard provides guidance on ensuring the operational status of a vehicle?

Answer 4

1002

Question 5

What should be done if the apparatus or a piece of equipment is found broken or defective?

Answer 5

Report it and follow up

Question 6

Why is diesel fuel residue problematic?

Answer 6

) It sticks to anything that it touches and leaves a gummy residue

Question 7

During the first six months of a new apparatus, how should the apparatus be washed?

Answer 7

Washed frequently with cold water

Question 8

How is it recommended to clean automotive glass?

Answer 8

With warm soapy water or commercial glass cleaner

Question 9

How long should you wait to apply wax to an apparatus?

Answer 9

) At least 6 months

Question 10

starting position and in what direction do you travel when conducting the circle or walk around method for inspecting an apparatus?

Answer 10

The driver’s door and clockwise

Question 11

What should be ensure is in place before beginning a vehicle inspection indoors?

Answer 11

That the area is properly ventilated

Question 12

What are tires selected for apparatus based on?

Answer 12

) Gross axle weight rating

Question 13

What NFPA states that tires must be replaced every seven years, regardless of their condition?

Answer 13

1911

Question 14

What turns on various lights at specified intervals?

Answer 14

Load sequencer

Question 15

An Electrical monitoring system that will shed electrical load in a predetermined order if the chassis voltage begins to drop below a predetermined level.

Answer 15

Load management system

Question 16

Operation of equipment or a conductor in excess of its rated ampacity

Answer 16

Overload

Question 17

Device that watches an electrical system for added loads that may threaten to overload the system

Answer 17

load Monitor

Question 18

When an overload condition occurs, the monitor will shut down less important electrical equipment to prevent the overload.

Answer 18

load shedding

Question 19

What is the distance that the pedal must be pushed before the throw-out bearing contacts the cluth
release fingers?

Answer 19

Free play

Question 20

Vehicles builts since 1990 are equipped with what type of braking system?

Answer 20

Antilock brakes

Question 21

At what psi will the air protection valve prevent air horns or other nonessential devices from being
operated?

Answer 21

) 80 psi

Question 22

How often should brakes be thoroughly tested?

Answer 22

Annually

Question 23

After what date may vehicles be equipped with a SCR?

Answer 23

Jan 1 2010

Question 24

What does the SAE number indicate on engine oil?

Answer 24

Viscosity

Question 25

What can batteries give off?

Answer 25

) Hydrogen gas

Question 26

What should you ensure prior to jump starting an apparatus?

Answer 26

The vehicle being used as the power source has the same voltage electrical system as the apparatus being jumped

Question 27

Repair work that involves complex tools, parts, or in-depth mechanical knowledge is left to a

Answer 27

) Certified mechanic

Question 28

Steering wheel play should be no more than how many degrees in either direction?

Answer 28

10 degree either way

Question 29

The maximum weight at which a vehicle can be safely operated on roadways in ideal conditions.

Answer 29

Gross Vehicle Weight Rating (GVWR)

Question 30

The weight of an empty fire apparatus fresh off the assembly line with no tools, water, equipment, or passengers.

Answer 30

Curb weight

Question 31

Per NFPA 1901 and 1911, a side-to-side variance in weight should not exceed

Answer 31

7%

Question 32

Devices used in an air brake system that connect between the activation pads and the brake pads that compensate for brake pad wear.

Answer 32

Slack adjusters

Question 33

"Keeping equipment or apparatus in a state of usefulness or readiness" is best described as:

Answer 33

maintenance

Question 34

"To restore or put together something that has become inoperable or out of place" is best described as

Answer 34

repairs

Question 35

Who is responsible for the allocation of maintenance and repair assignments for fire departments according to IFSTA?

Answer 35

The authority having jurisdiction

Question 36

Where should you begin washing the vehicle?

Answer 36

from the top down

Question 37

Modern day fire apparatus with a large amount of electrical equipment may be prone to:

Answer 37

overloading

Question 38

If an overload of the electrical system occurs, the load monitor may shut down less important electrical equipment known as:

Answer 38

load shedding

Question 39

What part of an apparatus electrical system turns on various lights at specific intervals so the startup electrical load for all de3vices does not occur at the same time?

Answer 39

) load sequencer

Question 40

The steering wheel play in a apparatus should not be more than?

Answer 40

2 inches

Question 41

DEF fluid within a diesel particulate filter system is used to reduce

Answer 41

nitrogen oxide emissions

Question 42

What best describes ABS braking?

Answer 42

) brakes that assists the driver operator in keeping the apparatus in a straight trajectory

Question 43

Which fluid should be checked while the vehicle is running?

Answer 43

Transmission fluid