IMS Flashcards
(184 cards)
Where and how is a Control Line established in Hazmat Incident?
2 cones spread apart approx. 30 feet apart and 80 to 100 ft. from tailboard of first- arriving engine company.
What are three personnel that can only have one job function at a time at a Hazmat scene?
Hazmat Commander, Hazmat Safety Officer, & Intervention Officer
Level 1 hazmat incident is defined as a release of less than __gallons of a liquid or less than __lbs of a solid of known hazardous material.
10 gallons, 20 lbs
Personnel shall be compelled to work no longer than __ minutes in chemical protective suits, without a rest?
20
If temperature is above __ a mandatory heat stress evaluation and pre-entry medical evaluation will be performed.
70 degrees F
What is max pulse for pre-entry medical evaluation at hazmat scene?
110 bpm
What is max blood pressure for pre-entry medical evaluation at hazmat?
140/90
What is max respiration for pre-entry medical evaluation at hazmat scene?
22 breaths per min
What is max initial temp for pre-entry medical evaluation on hazmat scene?
99 degrees
Individuals should not be allowed to wear semi-permeable or impermeable clothing if oral temperature exceeds?
100.6 degrees F
The goals for a hazardous material incident are:
Isolation Protection Spill control Leak control Fire control Termination
What 3 areas are created by first in engine companies on hazmat scene?
Control zone/line
Basic Decon
Area of Refuge
The decontamination area will be established within which zone?
Reduction (Warm) Zone
The Longevity pay schedule shall be tied to __ of the __step firefighter?
90% of 1%, A step
What are the only approved pins to be worn on OCFD uniform?
City of OKC Service pin Union Pin CISD Pin April 19, 1995 service pin Governors ribbon
What are the dimensions of the name tag?
1/2” x 2 3/8”
Washer extractors are locate at which fire stations?
4, 7, 14, 18, 25, 34
What are the Maintenance Shop hours of operation?
7:00am to 4:00pm
The normal lunch hour schedule for Fleet Maintenance Services is what?
11:00am to 12 noon
The duty mechanic will stand call from when to when?
Monday 7:00am to following Monday 7:00am
The radio call week begins and ends when?
7:00am on Wednesday until 7:00 am the following Wednesday.
What are the lunch hours for Communications Maintenance Section?
11:30am to 1:30pm
The Radio Call Person drives a shop service vehicle to and from residence carrying tools for repair while on call when?
From 4:00pm Wednesday to 7:00am the following Wednesday.
The Building Maintenance Division hours are?
Mon-Fri 8:00am to 4:30pm