Installing the Processer

Question 1

What is the first step in assembling a computer?

Answer 1

Lay down the foundation of the computer, which is the motherboard.

Question 2

What is the purpose of standoffs in computer assembly?

Answer 2

Standoffs are used to raise and attach your motherboard to the case.

Question 3

What should you check before purchasing a motherboard?

Answer 3

Check that the motherboard fits your computer case and is compatible with your CPU.

Question 4

Fill in the blank: To prevent electrostatic discharge, you can touch an electrical device that is plugged in but _______.

Answer 4

not powered on

Question 5

What is the function of thermal paste in CPU assembly?

Answer 5

Thermal paste is used to better connect the CPU and heat sink for improved heat transfer.

Question 6

True or False: You should keep computer parts in anti-static bags until you are ready to install them.

Answer 6

True

Question 7

What component is used to dissipate heat from the CPU?

Answer 7

Heat sink

Question 8

What is the correct orientation for installing a CPU on the motherboard?

Answer 8

Align the marker on the CPU with the corresponding marker on the CPU socket.

Question 9

When securing the CPU in the socket, what is important to remember?

Answer 9

You need to use a bit of force to ensure it is tightly secured.

Question 10

What should you do after applying thermal paste to the CPU?

Answer 10

Press the heat sink against the CPU and align the screws with the CPU socket.

Question 11

What is the purpose of connecting the Molex to the motherboard?

Answer 11

It controls the fan speed via the motherboard.

Question 12

List two methods to prevent static discharge when building a computer.

Answer 12

• Touch an electrical device that is plugged in but not powered on
• Wear an anti-static wristband

Question 13

What is the significance of the motherboard’s form factor?

Answer 13

It needs to match the computer case for proper installation.

Question 14

What should you do if the thermal paste is not spread evenly?

Answer 14

You may have to apply it multiple times to get it correct.

Question 15

When tightening screws for the heat sink, which pattern should you follow?

Answer 15

Screw opposite sides first to ensure secure attachment.

Question 16

What should you do after installing the CPU and heat sink?

Answer 16

Plug the molex connector to the motherboard.