Lesson 3 Midterms Flashcards
(95 cards)
1
Q
Elements of UN marking & UN packaging codes
A
1.UN symbol
2. Packaging identification codes
3. Packaging group level equivalent
4. Relative density or specific gravity
5. Hydrostatic pressure or solids
6. Year of manufacture
7. Location of manufacturer/shipper
8. Manufacturer identification or approval agency
2
Q
UN packaging codes - number 1
A
Drum
3
Q
UN packaging codes - number 2
A
Wooden Barrel
4
Q
UN packaging codes - number 3
A
Jerrican
5
Q
UN packaging codes - number 4
A
Box
6
Q
UN packaging codes - number 5
A
Bag
7
Q
UN packaging codes - number 6
A
Composite Packaging
8
Q
UN packaging codes - number 7
A
Pressure Receptacle
9
Q
UN packaging codes - letter A
A
Steel
10
Q
UN packaging codes - letter B
A
Aluminum
11
Q
UN packaging codes - letter C
A
Natural Wood
12
Q
UN packaging codes - letter D
A
Plywood
13
Q
UN packaging codes - letter F
A
Reconstructed Wood
14
Q
UN packaging codes - letter G
A
Fiberboard
15
Q
UN packaging codes - letter H
A
Plastic
16
Q
UN packaging codes - letter L
A
Textile
17
Q
UN packaging codes - letter M
A
Paper
18
Q
UN packaging codes - letter N
A
Metal other than steel or aluminum
19
Q
UN packaging codes - letter P
A
Glass, Porcelain, or Stoneware
20
Q
UN subcategory codes for A, B, or H Drums - Jerricans
A
1 - non-removable head
2 - removable head
21
Q
UN subcategoty codes for M bags
A
5M1 - Multiwall
5M2 - Multiwalled, Water-resistant
22
Q
Packaging Group Level
A
X - packing group 1 (highest degree of danger)
Y - packing group 2 (medium degree of danger)
Z - packing group 3 (lowest degree of danger)
OR
X - packing group 1-3
Y - packing group 2-3
Z - packing group 3
23
Q
Packaging group level is followed by ___
A
Packaging group level is followed by the relative density or specific gravity (unitless)
24
Q
It is a descriptive name, identification number, instructions, cautions, weight, specification, or UN marks, or combinations thereof, required on outer packaging of hazardous materials or dangerous goods
A
Marking
25
Types of Labels
hazard label
handling label
26
There may be a number-letter combination indicating a type of ____ and _____ of construction.
packaging and material
27
Category of A or B Boxes
1 - Ordinary A or B
2 - A or B with liner or costings
27
4D
Plywood Crate
28
Category of C Boxes
1 -Ordinary
2 - W/sift proof wall
28
2D
Plywood Wooden Barrel
29
Category of H Boxes
1- expanded plastic
2- Solid plastic
29
There may be a _______-_______ combination indicating a type of packaging and material of construction.
number-letter
30
Category of L Bags
2 - Sift Proof
3 - Water Resistant
30
There may be a number-letter combination indicating the type of 1)______, 2)_______ of ______ and a 3)_______ within the type of packaging or variation.
1.packaging,
2. material of construction
3.a subcategory
31
Category of M Bags
2 - Multiwall, Water Resistant
31
1A1
Non-Removable Head Steel Drum
32
4GV
Fiberboard Box Variation II Packaging
32
This type of combination indicate the type of packaging, material of construction and a subcategory within the type of packaging or variation.
number-letter
33
The description may also show a number-letter-letter-number combination.
-This mark includes the number six, indicating a composite type of packaging;
-two letters, the first indicating the inner receptacle's material and the second letter indicating the outer material;
-and the second number indicating the type of packaging (not a subcategory).
34
This mark includes the number six, indicating a _____ type of packaging;
composite
35
two letters, the first indicating the 1)_____ ______ ______ and the second letter indicating the _____ ____;
1.inner receptacle's material
2. outer material
36
and the second number indicating the _______(not a subcategory).
type of packaging
37
6HA1
Composite Packaging Consisting of a Plastic Inner, Steel Outer, Drum
38
6CD4
Composite Packaging Consisting of a Natural Wood Inner, Plywood Outer, Box
39
UN subcategory codes for A or B Boxes
1 - Ordinary A or B
2 - A or B with liner or costings
40
UN subcategory codes for C Boxes
1 -Ordinary
2 - W/sift proof wall
41
UN subcategory codes for H Boxes
1- expanded plastic
2- Solid plastic
42
UN subcategory codes for L Bags
2 - Sift Proof
3 - Water Resistant
43
UN subcategory codes for M Bags
2 - Multiwall, Water Resistant
44
These are strings of letters and numbers located on hazardous materials packaging that provide information on several key aspects of the chemicals inside
United Nations Symbol and UN Packaging Codes
45
They ensure that the people involved in shipping the materials are following regulations
United Nations Symbol and UN Packaging Codes
46
The encircled UN indicates packaging has been UN 1)_____ and _____. The UN symbol can either be included with a lowercase 2)_ ____ _ ______ _ in a circle or as an uppercase UN
1.tested and certified
2.u over a lowercase n
47
Packaging Identification Codes
This identifies the type of packaging and material of construction using a combination of number/letter
48
UN markings will always begin with a 1)____ that identifies the ____ of ____ that it is.
1. Number
2.Type of package
49
After the type of package is designated, the ______ ____in the package is listed. This is marked as a letter, ranging from ____ :
1. material used
2. A to P
50
Following the material, any ______ is listed. For example, drum packaging may have a removable or non-removable head.
1. subcategory
51
Boxes may be ordinary or with _____.
Coatings
52
These subcategories are often listed with a ____.
Number
53
The "G" would designate a _____ box with a ____ ____ wall.
1. fiberboard
2. sift proof
54
The letter X, Y, or Z indicates what packing group the package was tested t
-X = Packing Group | (Highest Degree of Danger)
-Y = Packing Group II (Medium Degree of Danger)
-Z = Packing Group III (Lowest Degree of Danger)
55
X = Packing Group I
Highest Degree of Danger
56
Y = Packing Group II
Medium Degree of Danger
57
Z = Packing Group III
Lowest Degree of Danger
58
Under the regulations, if a packaging has been tested to the highest degree of danger, it may be appropriate to place materials in that packaging which have a lower hazard.
Therefore, the following is also correct:
X = Packing Group I, II, III
Y = Packing Group II, III
Z = Packing Group III
59
Packing Group Level Equivalent is followed by
It is followed by the Relative Density or Specific Gravity(unitless)
60
Specific Gravity for Liquids
For liquid hazardous materials in single or composite packaging, the mark will contain the maximum specific gravity allowable for that packaging.
61
Hydrostatic Test Pressure for Solid
For single or composite packagings intended to contain solids or combination packagings for all materials, the mark will include a capital "S".
62
Hydrostatic Test Pressure for fluid
For hazardous liquids and gas materials in single or composite packagings, the mark will contain the hydrostatic pressure the container was tested to; the hydrostatic pressure should be included in kPa (kilopascals) rounded down to the nearest 10 kPa.
63
For single or composite packagings intended to contain _____ or ____ packagings for all materials, the mark will include a capital "S".
solids or combination packagings
64
For hazardous _____ and 2.____ materials in single or 3.____ packagings, the mark will contain the _______ _______ the container was tested to; the hydrostatic pressure should be included in kPa (kilopascals) rounded down to the nearest 10 kPa
1.liquids
2.gas materials
3. composite
4.hydrostatic pressure
65
Year of Manufacture
The marking must indicate the last two digits of the year of manufacture of the packaging.
Example:
16 for 2016
17 for 2017
66
The marking must indicate the last two digits of the year of manufacture of the packaging.
Year of Manufacture
67
Manufacture Location Country Symbol
The symbol of the country where the manufacturing took place must be listed in the mark. For packaging produced in the United States, the mark would show "USA".
68
The symbol of the country where the manufacturing took place must be listed in the mark. For packaging produced in the United States, the mark would show "USA".
Manufacture Location Country Symbol
69
Identification of the Manufacturer or Approval Agency
The identification of the party who is certifying that the packaging meets all of the required testing must be included in the mark. This may be shown in the form of a name and address, symbol of the manufacturer, or code of the agency certifying compliance. If the symbol or code is used, both must be registered with PHMSA.
70
The identification of the party who is certifying that the packaging meets all of the required testing must be included in the mark. This may be shown in the form of a name and address, symbol of the manufacturer, or code of the agency certifying compliance. If the symbol or code is used, both must be registered with PHMSA.
Identification of the Manufacturer or Approval Agency
71
The identification of the party who is certifying that the packaging meets all of the required testing must be included in the mark. This may be shown in the form of a 1)____, 2.________, or ___________ certifying compliance. If the symbol or code is used, both must be registered with _____.
1.name and address,
2.symbol of the manufacturer
3.code of the agency
4.Pipeline and Hazardous Materials Safety Administration(PHMSA)
72
What are Markings?
Marking means a descriptive name, identification number, instructions, cautions, weight, specification, or UN marks, or combinations thereof, required on outer packaging of hazardous materials or dangerous goods.
73
Marking means a _____ name, ___________, ________, ________, _______, ________, or _________, or ___________, required on outer packaging of hazardous materials or dangerous goods.
1.descriptive name,
2.identification number
3.instructions
4.cautions
5. weight
6.specification
8. UN marks,
9.3 combinations thereof
74
This is required on outer packaging of hazardous materials or dangerous goods
Markings
75
Example of specialized marking:
1. This side up
2. Overpacked
3. radioactive materials
76
This also apply to radioactive materials, poisonous dangerous goods, and dangerous goods in limited quantities. Refer to the specific sections found in 49CFR, Part 172, Subpart D
Specific marking
77
Specific marking requirements also apply to ______ materials, _____ dangerous goods, and _____ _____ in _____ _____. Refer to the specific sections found in ______, Part ______, Subpart ___.
1. radioactive materials,
2.poisonous dangerous goods
3. dangerous goods in limited quantities
4.49 e Code of Federal Regulations (CFR), Part 172, Subpart D
78
______ are used to notify the staff and operators on how to handle your package. The Arrow-Up Labels show which direction your package faces up.
Orientation labels
79
These labels are commonly used for two types of packages: liquid substances such as bodily fluids, blood samples, biological samples, vaccines, and etc …
Package Orientation Labels
80
Package orientation labels are commonly used for two types of packages:
Liquid Substances
Overpacked Packages
81
____ is defined as an enclosure used to contain one or more packages, consolidated into a single unit.
Overpack packages
82
______ require a stationary position when shipped
Overpack packages
83
Location of orientation package
You are also required to stick two labels on each of the opposite side of the package. The words "This Side/End/Way Up" may also be printed below or above the label.
84
Dimensions and Specifics of orientation label :
-There are two types of orientation labels used (the red and the black), however, they serve no different purpose. In certain cases, a red or a black label may appear more contrasting and therefore more noticeable for the handlers to identify.
-MINIMUM DIMENSIONS: 74 X 105 MM MINIMUM DIMENSIONS: 2.91 X 4.13 INCHES
-NOTE: For small packages of infectious substances, dimensions may be halved: 32 mm x 52.5 mm
85
The marking required:
1. Must be durable, in English, and printed on or affixed to the surface of a package or on a label, tag, or sign.
2. Must be displayed on a background of sharply contrasting color
3. Must be unobscured by labels or attachments; and
4. Must be located away from any other marking (such as advertising) that could substantially reduce its effectiveness.
86
Label Specification & Requirements
Durability
Design
Size
Color
Manufacturers Identification
Exceptions
Radioactive Symbols
87
What are labeling of Shipments?
-Labels identify the specific primary and subsidiary hazards posed by the materials in a dangerous goods package. These methods of communication rely c. specific colors, codes, and pictograms to clearly and immediately identify the type of materials in the package
-49 CFR 172.406 states labels must be printed on or affixed to a surface (other than the bottom of the package or containment device containing the hazardous material and be located on the same surface of the package and near the proper shipping name marking, if the package dimensions are adequate.
88
Labels identify the specific ______ and _______ hazards posed by the materials in a dangerous goods package. These methods of communication rely on _________, ______, and _____ to clearly and immediately identify the type of materials in the package
1. specific primary and subsidiary hazards
2. specific colors, codes, and pictograms
89
49 CFR 172.406 states labels must be _______________ to a surface (other than the bottom of the package or containment device containing the hazardous material and be located on the same surface of the package and near the proper shipping name marking, if the package dimensions are adequate.
1.printed on or affixed
