PART QG GENERAL REQUIREMENTS Flashcards
(32 cards)
QG-101 PROCEDURE SPECIFICATION
A procedure specification is a written document providing ____1____ to the person applying the material joining process.
1)Direction
PART QG GENERAL REQUIREMENTS
QG-102 PROCEDURE QUALIFICATION RECORD
The purpose of qualifying the procedure specification is to demonstrate that the joining process proposed for _____1____ is capable of producing joints having the required ___2__ _____3___ for the intended application.
1)Construction
2)Mechanical
3)Properties
QG-103 PERFORMANCE QUALIFICATION
The purpose of qualifying the person who will use a joining process is to demonstrate that ___1____ ___2___ to produce a sound joint when using a procedure specification.
1)person’s
2)Ability
QG-104 PERFORMANCE QUALIFICATION RECORD
The performance qualification record documents what occurred during the ___1____ of a test coupon by a ___2___ using
1)Production
2)person
QG-105 VARIABLES
QG-105.1 Essential Variables (Procedure). Essential variables are conditions in which a ____1_____, as described in the specific variables, is considered to ____2____ the mechanical properties (other than toughness) of the __3__.
3)Change
2)Affect
3)joint
QG-105.2 Essential Variables (Performance). _____1_____ are conditions in which a change, as described in the specific variable list, will affect the ___2____ of the person to produce a ___3____joint.
1)Essential variables
2)Ability
3)Sound
QG-105.3 Supplementary Essential Variables.
Supplementary essential variables are conditions in which a change will affect the toughness properties of the joint, ____1___zone, or base material. ______2_____ _______3_______ become additional essential variables in situations where procedure Qualifications require toughness testing.
1)Heat-affected
2)Supplementary
3)essential variables
QG-105.4 Nonessential Variables. Non essential variables are conditions in which a change, as described in the ___1____variables, is not considered to affect the _______2_________ of the joint.
1)Specific
2)mechanical properties
QG-105.5 Special Process Variables.
Special process variables are conditions that apply only to special processes that are described in the Part that ___1___ those ____2_____.
1)Addresses
2)processes
QG-106.1 Procedure Qualifications. Each organization is responsible for ___1___ the __2__ required by this Section
1)Conducting
2)tests
a) The personnel who produce test joints for procedure qualification shall be under the full ____1____ and control of the qualifyin ____2_____ during the production of ___3____ joints.
1)Supervision
2)Organization
3)these test
b) Production of qualification test joints under the ____1____ and control of another organization is not permitted. However, it is permitted to ____2____ any or all of the work necessary for preparing the ____3____ to be joined, the subsequent work for preparing test specimens from the completed test joint, and the performance of nondestructive examination and mechanical tests, provided the organization accepts full responsibility for any such work.
1)Supervition
2)Subcontract
3)materials
(c) If the effective operational control of procedure qualifications for two or more companies of different names exists under the same corporate ownership, the companies ____1____ shall describe in their Quality _____2 _____ or Quality ___2____ Program.
1)Involved
2)Control System
3)Assurance
QG-106.2 Performance Qualifications.
Each organization is responsible for the supervision and control of material joining performed by persons for whom they have operational responsibility and control. The organization shall conduct the tests ____1___ by this __2___.
1)Required
2)Section
achieving the minimum requirements specified for an acceptable joint. This responsibility cannot be ___1___ to another ______2______.
1)Delegated
2)organization
(a) The personnel who produce test joints for performance qualification shall be tested under the full supervision and __1___ of the ____2____ _____3_____.
1) Control
2)qualifying
3)organization
(b) The performance qualification test shall be performed following either a qualified ___1___ specification or a ___2___ ___1____ ____3_____.
1)Procedure
2)Standard
3)specification
c) Production of test joints under the supervision and control of another organization is not ____1____.
1)Permitted
d) The performance qualification test may be terminated at any ___1____, whenever it becomes apparent to the ___2____ conducting
1)Stage
2)Supervisor
(e) When a procedure qualification test coupon has been tested and found ___1____, the ___2___ who prepared the test ___3___ is also qualified for the joining process used.
1)Acceptable
2)person
3)Coupon
(f) Persons who are successfully qualified shall be assigned an ___1____ number, ___2__, or __3__by the organization
1)identifying
2)letter
3)Symbol
(g) If effective operational control of performance qualifications for two or more companies of different names exists under the same corporate ownership, the companies ___1____ shall describe in their Quality Control ___2____ or Quality ______3_______
1)Involved
2)System
3)Assurance Program
QG-107 OWNERSHIP TRANSFERS
Organizations may maintain effective operational control of PQRs, procedure specifications, and performance qualification records under different ownership than existed during the original procedure qualification. Multiple organizations under a common ___1___ may use ___2__, procedure specifications, and performance qualification records under that ____2____.
1)ownership
2)PQRs
3)Owner’s name
When an organization or some part ___1___is acquired by a new owner(s), the PQRs, ___2____ specifications, and performance qualification records may ___3___ valid for use by the new owner
1)Thereof
2)Procedure
3)Remain
