Quiz Flashcards
(40 cards)
A low water level condition in a boiler can result in damage to the boiler surface
True
A high water level condition in a boiler could lead to water hammer
True
The check valve on the feedwater line should be located closest to the shell of the boiler
False
The check valve allows the flow of water in one direction only
True
The check valve on the feedwater line commonly has a valve disc that swings to open and close the valve
True
A condensate return tank collects condensate returned from heating units for use in the boiler
True
A globe valve used as a feedwater stop valve must be installed so inlet pressure is applied from under the valve disc
True
The stop valve on the feedwater line should be located closest to the boiler
True
The vacuum pump is designed to discharge air and pump water
True
Centrifugal feedwater pumps are commonly driven by steam
False
A check valve is opened by turning the handle counterclockwise
False
A low water fuel cutoff is located slightly below the NOWL
True
The range of pressure on the vacuum switch on a vacuum pump is usually 2” to 8”
True
An evaporation test is performed by opening the low water fuel cutoff blowdown valve by hand
False
Any loss of water on the system must be made up by the makeup water feeder
True
The boiler operator must be present during an evaporation test
True
The makeup water feeder can be used as feedwater
False
Most makeup water contains some scale forming salts
True
The function of the automatic makeup water feeder is to replace water that has been lost
True
The automatic city water makeup water feeder is located slightly below the NOWL
True
The water in the boiler is heated, turns to steam, and leaves the boiler through the_______
Main steam line
When steam release heat in a heat exchanger, it turns to_______
Condensate
A_____pump returns condensate from the system back to the boiler
Vacuum
A_____valve allows the flow of water in one direction only
Check valve