RANDOM PROCEDURES

Question 1

Stable approach gates

Answer 1

1000

No flight shall continue an approach and landing past the 1,000 foot AAE Arrival Gate
unless the following requirements are met:

**1. The aircraft is on the correct lateral and vertical flightpath in accordance with the
AOM; and
**2. Final landing configuration (gear and flap) has been selected.

500

No flight shall continue an approach and landing past the 500 foot AAE Arrival Gate
unless the 1,000 foot gate requirements continue to be met, and;

• **1. Airspeed is stabilized on target (+10/-5 knots); and
• **2. Thrust stabilized, usually above idle, to maintain the target airspeed; and
  3. Rate of descent is stabilized not in excess of 1,000 fpm; and
  4. Final landing checks completed.

Question 2

Conditions to calculate landing dist

Answer 2

• The Aircraft is over MLW; or
• Landing with a tail wind; or
• The landing runway is shorter than 7 000 ft; or
  *The pressure altitude at destination is 6 700 ft or higher; or
  *The landing runway is contaminated; or
• There is an abnormality affecting the Landing Performance of the aircraft; or
  *Land and Hold Short Operations (LAHSO) are in effect.