Respiratory protection program

Question 1

How should the CO appoint the respiratory protection manager ?

Answer 1

In writing

Question 2

The RPPM should complete required training within how many months ?

Answer 2

3 months

Question 3

What are responsibilities of the Medical department representative in regards of the respiratory protection program ?

Answer 3

conduct, schedule pre-placement evaluations and periodic evaluations
Medically certify qualify individuals
Assist RPPM in identifying hazards, eval hazards and selecting the appropriate respirators

Question 4

What are the to requirements for respirator use ?

Answer 4

No deploying limited medical conditions

Current PHA

Question 5

When individual status cannot be determinate or other medical factors exist, what exam should be use ?

Answer 5

Certification exam 716

Question 6

What is an aerosol

Answer 6

Any material dispensed from a pressurized container using a gas propellant

Question 7

What is dust ?

Answer 7

Small solid particles created by breaking up of a larger particles by processes such us crashing, grinding or expulsion

Question 8

What is mist ?

Answer 8

finely divided liquid droplets suspended in air and generated by condensation or automatization

Question 9

By volume the use of O2 in an air purifying respirator must be?

Answer 9

19.5%

Question 10

By volume the use of O2 in an air purifying respirator must be?

Answer 10

19.5%

Question 11

What is IDHL

Answer 11

immediate danger to health and life

Question 12

What is IDHL?

Answer 12

The concentration of a contaminant which can produce an immediate irreversible debilitating effect on health or which can cause death

Question 13

Respiration control program enginering controls ?

Answer 13

Ventilation, exhaust

Question 14

(Respiratory protection program) what area is the ventilation section and its used?

Answer 14

Supply: can be used in CBN/CBR shipboard enviroment

Question 15

Respiratory enginering control exhaust sections and used ?

Answer 15

Forced air systems ( lab hoods med/dent spaces

Damage control gear ( red devil blowers)

Question 16

Air purifyng respirators adequate oxygen ?

Answer 16

19.5% by volume must be present

Question 17

What mask should not be used as air purylifyng reapirarors ?

Answer 17

Surgical mask ( they are only for medical and dental use only

Question 18

Which mask used for CBR warfare cannot be used as an air purifying respirator

Answer 18

Military gas mask

Question 19

When cleaning and sanitizing respirators what step must you follow?

Answer 19

Disasemble and hand wash the face piece l and parts in a warm water and mild diswashing detergent solution

Question 20

What temperatures should be avoided when cleaning respirators ?

Answer 20

Anythinh avobe 43 c and or 110 F temperatures of watee

Question 21

Process of sanitazin the face piece of the resp mask. Time and solution

Answer 21

2 min in 50 PPM of iodine (afd 15 ml of iodine solution to 15 liters of water)

Question 22

What are the temperatures of water to rinse respirators after sanitazion ?

Answer 22

Rinse in clean warm water in temp above 100f but but not more than 43 c or 110 F

Question 23

How should you store a newly cleaned and bag respirator mask ?

Answer 23

Store in a flat and clean, dry uncontaminated area without crowding which may distort the respirator piece

Question 24

How do you perform quality fit testing ?

Answer 24

By using isoamyl acetate ( banana oil ) saccharin mist and irritant smoke ( preferred method)

Question 25

Which fit testing for respirators can be conducted at shore and sea and which one at shore only ?

Answer 25

Qualitative at shore and sea

Quantitative at shore only