Safe Operating Procedures( drill press)

Question 1

operate machine only

Answer 1

with instructor’s permission and after you have received instruction’s

Question 2

how should you dress and what state should your hair be

Answer 2

remove jewlery, elimante loose colthing and confine/tie hair back

Question 3

Before you start working with the machine

Answer 3

make sure all guards are in place

Question 4

Always use PPE

Answer 4

personal protective equipment that includes eye protection

Question 5

Inspect materials for defects

Answer 5

like warps knots and foreign objects

Question 6

Are you supposed to wear gloves when operating this machine a:yes b: no

Answer 6

the answer is b:no

Question 7

the belt guard should always be

Answer 7

in place

Question 8

why do we clamp our work to the table

Answer 8

so it doesn’t move

Question 9

why should long stock be placed to the left

Answer 9

to avoid being struck by the material if a jam occurs

Question 10

make sure the chuck key is_______ from the chuck before starting

Answer 10

removed

Question 11

make your adjustments with the machine’s

Answer 11

power off and unplugged

Question 12

why do we adjust table depth

Answer 12

to avoid drilling into the table

Question 13

Never perform setup or layout work on the:

Answer 13

table

Question 14

Make sure what is secure in the chuck and in good condition

Answer 14

drill bit or cutting tool

Question 15

the harder the material the ____ the speed

Answer 15

slower

Question 16

when finish with the machine

Answer 16

remove the drill bit or cutting tool and clean up debris