SCBA Manual Chapter 6- Questions - Sheet1 Flashcards Preview

06. SCBA > SCBA Manual Chapter 6- Questions - Sheet1 > Flashcards

Flashcards in SCBA Manual Chapter 6- Questions - Sheet1 Deck (11)
Loading flashcards...
1
Q

From SCBA:

What are the tempetures of water use to clean the facepiece ?

A

Cold or Warm of 110 degrees F maximum

2
Q

From SCBA:

What type of material is use to clean the facepiece as well as the SCBA regulator ?

A

Wescondy Plus

3
Q

From SCBA:

When disinfecting the Facepiece how many pumps of Wescodyne plus will be applied on the regulator side and on the face side of the facepiece ?

A

3 Full pumps

4
Q

From SCBA:

How much time has to be allow after cleaning materials has been applied on facepiece prior to contact or rising ?

A

10 minutes

5
Q

From SCBA:

How many Pumps of Wescondyne pluse will be applied inside the breathing regulator for cleaning porpuses ?

A

6 full pumps

6
Q

From SCBA:

Allow how much time prior of come in contact or rising the regulator after cleaning materials has been applied ?

A

10 minutes

7
Q

From SCBA:

What can be use to Remove soot, and debris of the SCBA hardness, cylinder, backframe,harness assembly, shoulder straps ?

A

Damp Sponge

8
Q

From SCBA:

The SCBA cylinder will be replace once the psi has fallen below ?

A

4000 psi

9
Q

From SCBA:

The air cylinder Scott Air Pak fifty SCBA contains how many CUBIC feet when pressurized to 4500psi ?

A

87

10
Q

From SCBA:

The only cleaning materials that are use to clean the air supply cylinder are ?

A

Wescodyne plus and liquid dish detergent

11
Q

From SCBA:

Compressed air should never be used to cleaning unless it is reduce to how many PSI by an approved regulator ?

A

30psi