Section 1 - Scope

Question 1

Which of the following activities is NOT included in the scope of API 510.

A. Rerating a vessel

B. Operating a vessel

C. Replacing a vessel head

D. Internally inspecting a vessel

Answer 1

B. Operating a vessel

Question 2

Which of the following activities is not included in the scope of API 510.

A. Setting relief device intervals

B. Performing vessel alterations

C. Performing vessel fabrication

D. Performing vessel maintenance

Answer 2

C. Performing vessel fabrication

Question 3

Which of the following equipment types is not covered by Api 510.

A. heat exchanger

B. Safety relief valve

C. Distillation column

D. Process heater (Furnace)

Answer 3

D. Process heater (furnace)

Question 4

API 510 can be used?

Answer 4

By petro-chemical facilities and any other industry

Question 5

API 510 takes affect.

Answer 5

Once the vessel is placed in service.

Question 6

APR 510 covers vessels constructed to which fabrication code?

Answer 6

Any fabrication code.

Question 7

When does APR 510 stop applying to vessels?

Answer 7

Retired and abandon

Question 8

During repairs and alteration most of the code requirements come from.

Answer 8

ASME Section VIII Or the construction code.

Question 9

During a vessel repair, if there is a conflict between the requirements of API 510 in the construction code which should be followed?

Answer 9

API 510

Question 10

During a vessel alteration, if there is a conflict between the requirements of API 510 in the construction code which should be followed?

Answer 10

API 510

Question 11

Companies that use API 510 must.

Answer 11

Either employer or have access to an authorized inspection agency

Question 12

Which of the following individuals must be directly employed by the owner?

A. Authorize inspector

B. Examiner

C. Pressure vessel engineer

D. Repair organization

E. No one all can be contracted personnel

Answer 12

E. No one all can be contracted personnel

Question 13

Who is responsible for responding to inspection results that require corrective of action?

Answer 13

Owner/user

Question 14

An in-service vessel is being repaired or Altered if there’s a conflict between the requirements of API 510 and the Legal Jurisdiction, which should be followed?

A. API 510

B. The legal Jurisdiction

C. The one with the most stringent requirements

D. Either set of the requirements based on engineer in AI approval

Answer 14

C. The one with the most stringent requirements

Question 15

An in-service vessel is being inspected. If there is a conflict between API 510 in the legal jurisdiction, which should be followed?

A. API 510

B. The legal Jurisdiction

C. The one with the most stringent requirements

D. Either set of the requirements based on engineer in AI approval

Answer 15

C. The one with the most stringent requirements

Question 16

Which of the following vessels, that may be exempted from API 510, should be considered for inclusion in the owner/users API 510 program?

A. 140’ low pressure storage tank

B. Oil mist accumulator

C. Small filter

D. Vacuum flasher

Answer 16

D. Vacuum flasher

Question 17

Which code is used for fitness for service evaluations?

A. API 579

B. API 660

C. API 2201

D.ASME B&PV Section V

Answer 17

A. API 579

Question 18

Which cold is used for our RBI assessment?

A. API 573

B. API 579

C. I API 580

D. API 2201

Answer 18

C. API 580