Stapling

Question 1

Which DST series EEA stapler diameters are available in both 3.5 mm and 4.8mm staple heights?

Answer 1

21mm, 25mm, 28mm

Question 2

Which critical In-Service point (steps to use) is a visual clue that tells the surgeon that the DST Series TA stapler has fired the stapler?

Answer 2

The handle stays in the closed/locked position

Question 3

After properly firing the DST Series EEA 28mm disposable stapler, a surgeon should turn the black knob ________ full turns to allow the anvil to tilt on its side for easy removal.

Answer 3

Counter-clockwise, 2

Question 4

Following the use of the EEA stapler, the “donuts” should be inspected to:

Answer 4

Assure continuity and the presence of all layers of tissue within the staple line

Question 5

The DST TA stapler is available in jaw lengths of ______, _________, ___________, and _________ mm.

Answer 5

30, 45, 60, 90

Question 6

Which EEA stapler can be used with the DST Orvil?

Answer 6

XL EEA Staplers only

Question 7

True or False. The EEA Orvil device can be used with both standard length and XL length EEA handles.

Answer 7

False

Question 8

Which staple height is not available for DST TA Linear Stapler?

Answer 8

3.8mm

Question 9

True or False. When the stapler length is upsized or downsized, it is important to ensure that the stapler length and the cartridge length always match.

Answer 9

True

Question 10

True or False. When the cartridge is upsized or downsized for its staple height only (upsized from Purple to Black or downsized from Black to Purple) keeping its length the same, the surgeon can continue to use the same stapler.

Answer 10

True

Question 11

True or False. When a liner stapler that has been fired is opened, the lockout device will deploy.

Answer 11

True