Tools Flashcards
(32 cards)
Wooden Mallet
A wooden mallet is usually used to drive down chisels and dowels.
Wooden Chisels
It is used to remove layers of wood by using a slicing motion
Tape Measure
A tape measure is used to measure the distance or size of something
Tri Square
The main use of a tri square is to mark and measure on material
Pinshers
They are usually used to remove objects like nails out of materials.
Claw Hammers
It is normally used to drive nails down or you could use the claw side of the hammer to draw out the nail
Tenon Saws
Tenon saw are used for making short and accurate cuts.
Sliding Bevel
The sliding bevel is used to measure and mark any angles.
Nail Punch
A nail punch is used for driving the head of a nail below the wood’s surface
Tack Hammer
A tack hammer is used for securing fabric using tacks or small nails
Jack Planes
Jack planes are used to decrease the thickness of the wood
Adjustable spanners
Adjustable spanners are used to tighten and loosen items such as nuts and bolts
Sash Clamps
Sash clamps are used for gluing wide panels
Quick Action Clamps
It is made to help you shift the sliding arm into place with minimal effort
Drill
The drill is used to make round holes
Impact driver
Impact drivers are used to drive short screws in
Biscuit Cutters
A biscuit cutter is used to cut biscuit slots into pieces of wood
Router
Routers are used for creating perfect cuts and corners
Orbital Sander
It creates a smooth surface
Drill
The drill is used to make round holes
Biscuit Cutters 100mm
A biscuit cutter 100mm is used to cut biscuit slots into pieces of wood
Plane
A plane shaves the surface of wood to make it smoother
Belt Sander
A belt sander helps smoothens rough surfaces and edges
Bobbin Sander
A bobbin sander is used to sand curves and straighten edges
