Transmission service - part B

Question 1

what should be done before installing the transmission back into the vehicle

Answer 1

bench test the shift system

Question 2

before tightening any fasteners you should always make sure the transmission is

Answer 2

fully seated and never pull the transmission into position with the fasteners

Question 3

in order to check for air leaks make sure the chassis air supply is at least

Answer 3

90 psi

Question 4

when working on hybrid systems what should be done

Answer 4

set up a buffer zone around the transmission so only certified high voltage technicians can enter

Question 5

what is the recommended buffer zone distance

Answer 5

1 meter

Question 6

what medium of stored energy in contained within an accumulator

Answer 6

fluid and gas

Question 7

what is the minimum length of time permitted to allow the fluid in the accumulator to drain back to the reservoir

Answer 7

5 min