Brainscape's Knowledge GenomeTM


Top Flashcards (Certified)
All Flashcards

CDCs > Vol 1 UREs > Flashcards

Vol 1 UREs Flashcards

(100 cards)

Start Studying
1
Q

How many months of time in service must you have in the Air Force before attending ALS?

A

48

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

This AFI governs the current wing’s maintenance and operations group structure.

A

AFI 21-101

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Which commander allocates the resources for maintenance to meet mission requirements?

A

Wing

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Which individual manages the squadron’s cannibalization program?

A

MOO/MXS

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

This coordinating/facilitating agency/office is responsible for monitoring and supporting the flight line maintenance effort.

A

Maintenance operations center (MOC)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

What maintenance squadron flight primarily performs off-equipment maintenance of electronic warfare and photographic systems?

A

Avionics

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

One of the basic principles of supply discipline in the Air Force is to

A

Safeguard and preserve property effectively

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Supply discipline in the Air Force is best described as

A

Extra consideration to get the most from available resources

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Who does supply discipline start with in the Air Force?

A

Individuals

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Who in the Air Force is accountable for equipment items?

A

Supply personnel and equipment custodians

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

What supply report provides the user with a list of parts ordered, but not received?

A

Due-out validation listing (M30)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Which type of property responsibility requires that directives and instructions be issued?

A

Command

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

What type of property responsibility do you have when taking possession of a box that you see fall off an Air Force supply truck?

A

Custodial

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

One way you can be relieved of Supply property responsibility is to

A

Turn the property in to supply

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

When a person who is responsible for property is transferred, and the property remains with the organization, property responsibility

A

stays in the organization

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

What document must be used to explain and record the circumstances involving the loss, damage, or destruction of government equipment that cost more than $500?

A

Report of survey

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

Personnel received a draft CAT 1 PQDR. Within how many hours must they submit a formal PQDR?

A

72

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

For a situation to result in a CAT 2 PQDR there must be a

A

Product that does not conform to specifications

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

How many hours does the discoverer have to forward a draft copy of a CAT 1 PQDR to the screening point after discovery?

A

24

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

How many days does the discoverer have to forward a CAT 2 PQDR to the screening point after discovery?

A

Three

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

Refer to this section of the security classification guide to determine the classification level of system components

A

Hardware

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

Which security classification guide section lists the transmit frequency of an EW system?

A

Performance and capabilities

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

You would use the Standard Form 702, Security Container Check Sheet, to ____

A

Document opening and closing the security container

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

What is required before someone from Supply gives you custody of a Top Secret asset?

A

Be listed on an authorized roster

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
What is necessary to safeguard Top Secret equipment installed aboard an aircraft without priority "A" designation?
Use an intrusion detection system
26
Which commander is responsible for the security of classified equipment on an aircraft in the event of an emergency landing?
Aircraft
27
At what point are the symbols erased that you enter on the AFTO Form 781A, Maintenance Discrepancy and Work Document?
Never, even if there are errors entered
28
Who ensures the JCN (when assigned) is entered on the AFTO Form 781A?
Crew Chief
29
How can you document an aircraft/equipment malfunction that is found during an operational check on the AFTO 781A?
Sign off as OPS CHK BAD and enter the malfunction
30
This AFTO Form is completed and retained for a transient aerospace vehicle until it returns to the home organization
781C
31
Who checks the AFTO Form 781C before an aircraft's flight to determine the avionics configuration?
Aircraft commander
32
Which AFTO Form is used to document aircraft/equipment servicing information?
781H
33
The responsibility for signing an aircraft's exceptional release before flight, other than authorized maintenance personnel, lies with this individual.
Aircraft commander
34
How do you mark out the red dash item in the AFTO 781K when an entry is transferred?
Draw a line above or below the red dash
35
How many parts does an AFTO Form 244, Industrial/Support Equipment Record, have and what type status does it document?
Five; AGE
36
What portion of the AF Form 1492, Warning Tag, is used to provide a "cross -check" with the aircraft forms and is inserted through the aircraft forms binder?
Bottom
37
AFTO numbers are limited to having this total number of positions, including dashes
25
38
The fourth group of characters in the TO number series 1B-1B-2-6 identifies the ________
Section of a sectionalized TO
39
This type Air Force Manual contains data for operating and servicing aircraft equipment
Other Equipment TOs
40
Publications that contain instructions for using equipment, in addition to data contained in other manuals, are identified as
supplements
41
In the Air Force, commercial off-the-shelf (COTS) technical manuals are normally identified by an
Assigned TO number
42
Which type AFTO is not a TCTO?
Emergency action
43
Interim TCTOs are normally replaced by formal TCTOs within a maximum time of
10 days
44
Which of the following is not an abbreviated TO?
Automation guide
45
What letters would you find in the numerical designator of a checklist TO?
CL
46
When you insert change pages into existing TOS, it is inserted where?
In place of the page of the same number
47
The three types of authorized TO supplements are
routine, safety, and operational
48
Which of the following statements best describes technical order page supplements (TOPS)?
TOPS can be issued when time and circumstance prevent issuing a standard change
49
This statement is correct regarding TO revisions
The original TO, including all changes, appendixes, and supplements are replaced
50
Before an AF Form 22, Changething, is submitted, the submitter's supervisor makes sure the report is valid, warrants submittal, and _____
Signs the report
51
What are the types of TO change recommendation reports you can make?
Emergency, urgent, and routine
52
What type OMMS does the alpha code FC in reference designator 3231FC01 identify?
Component type
53
An OMMS general system (GS) manual provides
Fault descriptions and fault isolation procedures
54
An OMMS job guide (JG) manual includes
A towing and operational checkout
55
An OMMS fault reporting (FR) manual provides
A means of conveying fault information
56
Section I of the IPB provides information on using codes and designations found in the TO and a
List of related TOS
57
Section I of the IPB introduction provides the capability of cross-referencing
Part numbers and figures
58
What column in Section II of the IPB contains the letter prefixes for the NAS?
Part number
59
The series of dots used under the "Description" in the Section II column of an IPB ________
Shows relationships between next higher assemblies
60
In Section III of the IPB, parts numbers are arranged in sequence
Alphanumerically
61
In Section IV of the IPB reference designator are arranged in sequence
Numerically
62
How many fields are in a CPIN identifier?
Four
63
The first field in the CPIN identifier consists of these type codes
Category and major function
64
Air Force customers must establish CPIN requirements through
TODO
65
Which major function of the ACPINS is used to deny unauthorized requests?
Distribution
66
How many general types of ACPINS compendiums are there?
Six
67
Which type compendiums serve as research aids for selected CPIN data elements?
Cross-references
68
Which tool layout prevents you from inventorying a CTK quickly and accurately?
Tools set loosely in a drawer
69
When logging a missing item on the affected aircraft forms, include everything below except the
Time tool was lost
70
Who will initiate the lost tool report after a thorough search when a tool is not found?
Person issued the tool
71
How many inch pounds of torque has been developed at the bolt end of a wrench if 2 pounds of force is applied to the handle end of a 5-inch wrench?
10 in/lbs
72
When would you use a torque wrench to break loose a bolt?
Never
73
The purpose of using a proper torque technique is to
Prevent the assembly from warping
74
Before using a torque wrench that was dropped, you must
Have it recalibrated
75
Sealants protect the airframe against water, fumes, and the atmosphere to prevent this from happening
Corrosion
76
What type sealant has an application time where it remains suitable to use?
Curing
77
What type leakage does a waveguide gasket prevent?
Energy
78
How many major aircraft structural areas does the B1-B contain?
Five
79
This provides the lift needed for aircraft to fly
Wings
80
On the B1-B Lancer, the diffuser is part of the
Nacelles
81
Which B2-A Spirit doors have blade seals?
Exterior
82
What aircraft system monitors temperature changes and overheat conditions in the engine nacelles?
Fire protection
83
What aircraft system supplies flight control surface movements and operates ramps and brake activation?
Hydraulic
84
Which communication system encrypts and decrypts voice comms?
Secure
85
Which system allows aircrews to land safely at night or in adverse weather conditions?
Instrument Landing System (ILS)
86
Which navigation system aids aerial refueling operations?
Rendezvous beacon
87
What navigation system determines the aircraft's height above the terrain?
Radar altimeter
88
You can avoid unwanted activation of an aircraft ejection seat by doing all of the following except
Testing the seat personally
89
When exposed to aircraft noise, prevent damage to your hearing using the precaution of limiting
Exposure
90
What best describes how you would operate in a hazardous noise area, regardless of duration?
Wear hearing protection
91
Who determines (quantifies) the specific noise exposure limits for pregnant workers?
Bioenvironmental
92
When approaching overheated aircraft wheels, always approach ________
From the aircraft's nose or tail direction
93
Which area of an aircraft is not a primary fire hazard area?
Avionic equipment compartment
94
All of the following are safety considerations when working around electricity except
Always use wooden handled tools
95
One of the delayed effects you could suffer from electrical shock is
Personality changes
96
The first step you take when a person is unconscious because of electrical shock is to
Break the connection between the victim and the circuit
97
Your intestines could rupture by improperly using compressed air as low as
4 psi
98
Which method should not be used to clean dirt and debris from your work area?
Compressed air
99
It is important for you to store compressed air cylinders in an area that is clean and dry to prevent
Corrosion
100
Which action is not a safety precaution for deactivating chaff/flare systems?
Loading expendables during routine maintenance

CDCs (9 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2025 Bold Learning Solutions. Terms and Conditions