Single stage job calculations 2 Flashcards

1
Q

name the critical values in a single stage calculation?

A

Dimensions and capacity of the open hole and casing
Annular volume of the casing in open hole and in previous casing
Cementing information such as API slurries and density of additives
Absolute volume information

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q
Name the section of your Field Data Handbook where yo can find information 
Cement Slurry Properties
Outside diameter displacement of tubing and drill pipe
Drillpipe displacement bbl/ft
Density of additives
Slurry volumes
Capacities - holes
Capacities-tubing, drillpipe, casing.
A

Section 3 Capacities (tubing drillpipe casing and holes), drillpipe displacement and OD displacement of tubing and drill pipe
Section 5 Slurry volumes
Section 7 Density of additives and cement slurry properties.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Is the volume between the collar and the shoe important in single-stage calculations?

A

Yes

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Is the volume of the open hole below the casing shoe critical to single stage calculations?

A

No, (the vol in the rathole), the mud in the rathole tent to maintain there and the cement to go upward

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

how many times more water the prehydrated bentonite absorbs than the conventional one?

A

4 times

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

How much volume must be overdisplacement for a shoe track?

A

1/2 of the volume capacity

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

how Yield slurry is changed?

A

by modifying the solid-to-liquid ratio of the cement slurry by adding water.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

what do total water requirement include?

A

Mix water needed (+20% safety margin)
Dead volume of the tank (mix fluid)
Water for washes spacers and displacement
20 bbl for priming and washing up

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

what is the total time in a cementing job?

A

the minimum thickening timer for the slurry to be used

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

what does the estimated time for cementing operations include?

A

Mixing Time
Displacement Time
10 min for plug drops and other activities
1 hr safety margin

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

How does the minimum thickening time must be?

A

the greater of 1.5 times the job’s time

or plus 2 hr

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

How many gallons a barrel is

A

42 gal/bbl

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

how many gallons a ft3 is

A

7.48 gal/ft3

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Which of the next statements apply when ensuring water quality for a cementing job?

  • Test cement and additives from samples supplied to the lab by manufacturer
  • Perform lab test with the same water used during cement job.
  • Use clean water from the site to test cement in laboratory.
  • Run a confirmation lab test immediately prior to cementing
A
  • Perform lab test with the same water used during cement job.
  • Use clean water from the site to test cement in laboratory.
  • Run a confirmation lab test immediately prior to cementing
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

are displacement volume calculations affected in any way by the ID sampling of pipe lots?

A

yes

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Is there a method available to correct for the amount of air retained in Oil-based and salt systems?

A

Yes, there is a compressibility factor for the displacement fluid, calculated from density measurements of mud balances.

17
Q

considering current manufacturing practice, which method do you use for determining casing ID for calculations?

A

Determine the average between theoretical ID and the largest possible pipe diameter within API specifications

18
Q

How is cement yield improved?

A

by modifying the solid to liquid ratio of the cement slurry adding water.
and modifying the density of the solids

19
Q

what is the maximum BWOC of bentonite that can be used?

A

25% BWOC

20
Q

How many samples from a lot of sections of pipe would give an acceptable estimate of average pipe capacity and a more accurate displacement volume?

A

10% of the lot