6: Wave Behaviour Flashcards

1
Q

What does the principle of superposition state?

A

When two or more waves overlap (superimpose), the resultant displacement equals the vector sum of the individual displacements at that position and time

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Define these words

  1. Wavelength
  2. Displacement (and amplitude)
  3. Frequency
  4. Time period
A
  1. Wavelength is the distance between equivalent points on 2 consecutive waves [when distance is plotted against distance] e.g. crest-to-crest
  2. Displacement is the distance from the equilibrium position (Amplitude is the maximum displacement from the equilibrium position)
  3. Frequency is the number of complete waves passing a given point in one second.[measured in Hz]
  4. Time period is the time taken for a wave to completely pass through any given point. This is the reciprocal of the frequency: 1/time period = frequency & 1/frequency = time period. Note: when displacement is plotted against time, the distance between equivalent points on two consecutive waves is the ‘time period’
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Interference can be [] or destructive

A

Constructive

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

What is total destructive interference?

A
  1. When a crest and a trough of equal size (amplitude), combine to give nothing. The two displacements completely cancel each other out.
  2. Destructive interference occurs when the two waves are pi radians or lambda/2 or 180o out of phase.
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

What is an example of constructive interference?

A

When two crests (or two trougns) from separate waves combine to create a bigger [resultant] crest (or trough).

Constructive interference occurs when the phase difference is 0o

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

For the interference of the waves to be noticeable, what has to be almost equal?

A

The amplitudes of the 2 waves

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q
  1. What is phase?
  2. What does a phasor represent?
A
  1. Phase describes the stage of a particular point in a wave cycle
  2. The phase of a particular part of the wave

Phasors are rotating arrows that represent the phase of each point on a wave.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Which way does a phasor rotate?

A

Anticlockwise

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

How do you work out rate of phasor rotation?

A

Phasor rate of rotation is the same as the wave frequency

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q
  1. What is the phase difference of waves exactly out of phase (antiphase)?
  2. What about their phasors?
A
  1. Phase difference is π radians [odd-numbers of π radians].
  2. There phasors point in opposite directions
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

What does ‘in phase’ mean for 2 points on a wave?

A

Two points on a wave are in phase if they are both at the same point in the wave cycle [e.g. crest and crest; trough and trough etc.]

Points that have a phase difference of zero or a multiple of 2π are in phase - their phasors point in the same direction

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

What is the phase difference of two waves emitted from an oscillator?

A

The waves are in phase so their phase difference is a multiple of 2π

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

To get clear interference patterns the two sources must be []

A

Coherent

  • The waves must have the same frequency and wavelength.
  • The wave must also have a constant phase difference between them.
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

What does it mean if two sources are coherent?

A
  1. They have the same wavelength and frequency
  2. and
  3. Have fixed/constant phase difference between them
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

What affects whether you get constructive or destructive interference at a point?

A

Depends on how much further one wave has travelled than the other wave to get to that point (assuming the sources are coherent and in phase)

  1. If the phase difference between the waves is a whole number of wavelengths, then constructive interference will take place.
  2. If the phase difference between the waves is an odd number of half-wavelengths, then destructive interference will take place
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

What is path difference?

A

The amount by which the path travelled by one wave from a source is different than the path travelled by the other wave from the source is called the path difference.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

Describe constructive interference?

A
  1. At any point an equal distance from both sources (that are coherent and in phase), Path difference is zero

or

2.Where the path difference is a whole number of wavelengths

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

What is the path difference for constructive interference?

A

For constructive interference, the phase difference is nλ where n is an integer

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

What is the path difference for total destructive interference?

A

Destructive interference occurs when the path differnce is an odd number of half-wavelengths. e.g. (2n+1) λ/2

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

Describe total destructive interference

A

At any point where the path difference between the waves is an odd number of half wavelengths.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

define standing waves

A

transmitted wave reflected at boundary with a 180 degrees phase change. transmitted and reflected waves superpose creating nodes and antinodes. at certain frequencies positions of nodes and antinodes are constant, resulting in a standing wave

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

What is a standing wave? (simple)

A

The superposition of two progressive waves with the same wavelength, moving in opposite directions

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

When do you get a standing wave?

A

When a progressive wave is reflected at a boundary and superposes with another wave of the same wavelength

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

Is energy transmitted by a standing wave?

A

No

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

What are resonant frequencies?

A

Frequencies where the oscillator happens to produce an exact number of waves in the time it takes for a wave to get to the end and back again, then the original and reflected waves reinforce each other

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

What is a node?

A

A position, on a standing wave, of zero amplitude

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

What is an anti-node?

A

A position, on a standing wave, of maximum amplitude

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
28
Q

Describe the fundamental frequency

A

The standing wave is vibrating at the lowest possible frequency, the fundamental frequency This is the first harmonic. It has one loop with the node at each end

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
29
Q

What is another name for the second harmonic?

A

The first overtone

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
30
Q

Describe briefly standing waves on stringed instruments

A

They are transverse standing waves. Your finger or the bow sets the string vibrating at the point of contact. Waves are sent out in both directions and reflected back at both ends

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
31
Q

What does a cathode ray oscilloscopes measure? What does it display?

A

Voltage It displays waves from an oscillator as a function of voltage over time

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
32
Q

On a cathode ray oscilloscope, what does the vertical axis show? What does the horizontal axis show?

A

Vertical: voltage Horizontal: time

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
33
Q

Describe standing waves and the wind instrument or other air column.

A

They are longitudinal standing waves If a source of sound is placed at the open end of a wind instrument, there will be some frequencies for which resonance occurs and a standing wave is set up Nodes form at close ends. Antinodes form at the open ends

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
34
Q

What is refraction?

A

The way a wave changes direction as it enters a different medium

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
35
Q

When does refraction occur?

A

When the medium a wave is travelling in changes

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
36
Q

When a wave is refracted does the speed, wavelength, and frequency change?

A

The speed changes, the frequency stays constant, so the wavelength changes too

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
37
Q

What happens if light meets a boundary at an angle to the normal? (refraction)

A

The transmitted ray is bent or refracted as it travels at a different speed in each medium

38
Q

What does the refractive index of a material measure?

A

How much it slows light down

39
Q

If the ray bends towards the normal – is it speeding up or slowing down? Why? What happens to the wavelength?

A

Slowing down. The ray is going from a less optically dense material to a more optically dense material. The wavelength decreases

40
Q

What medium does light travel fastest in?

A

Vacuum

41
Q

Why does light slow down in other materials?

A

Because it interacts with the particles in them

42
Q

What is the relationship between optical density and speed of light?

A

The more optically dense a medium is, the more light slows down when it enters it

43
Q

What is the angle of incidence?

A

The angle the incoming light makes to the normal

44
Q

What is absolute refractive index a measure of?

A

Optical density

45
Q

Describe refraction

A

When a ray of light meets a boundary between one medium and another, some of its energy is reflected back into the first medium and the rest of it is transmitted through into the second medium

46
Q

What is the angle of refraction?

A

The angle the refracted ray makes with the normal

47
Q

What can you assume that the refractive index of air is?

A

1 - because the speed of light in air is only a tiny bit smaller than c

48
Q

What is diffraction?

A

The way that waves spread out as they come through a narrow gap (aperture) or go round obstacles

49
Q

Do all waves diffract?

A

Yes

50
Q

What does the amount of diffraction depend on?

A

The wavelength of the wave compared with the size of the gap

51
Q

Describe diffraction when the gap is a lot bigger than the wavelength

A

Diffraction is unnoticeable

52
Q

Describe diffraction when the gap is several wavelengths wide

A

Noticeable diffraction

53
Q

When do you get the most diffraction?

A

When the gap is the same size as the wavelength

54
Q

What can you use to show the diffraction of water waves?

A

A ripple tank

55
Q

Why can you hear someone through an open door easily, even if they are out of sight?

A

When sound passes through a doorway, the size of the gap and the wavelength are usually roughly equal, so a lot of diffraction occurs

56
Q

Why can you not always see a person the other side of an open doorway (slightly out of sight) even though you can hear them?

A

When light passes through the doorway, it is passing through a gap around a hundred million times bigger than its wavelength - the amount of diffraction is tiny

57
Q

How can you demonstrate the diffraction of light with a laser light?

A

Shine the laser light though a very narrow slit onto a screen. You can alter the amount of diffraction by changing the width of the slit.

58
Q

Laser light is []

A

Monochromatic

59
Q

How can you demonstrate the diffraction of light using a white light source?

A

You need a set of colour filters. The size of the slit can be kept constant while the wavelength is varies by putting different colour filters over the slit

60
Q

Describe what happens when a wave meets an obstacle, link to wavelength and diffraction

A

You get diffraction around the edges. Behind the obstacle is a ‘shadow’, where the wave is blocked. The wider the obstacle compared with the wavelength of the wave the less diffraction you get, and the longer the shadow

61
Q

What is the diffraction pattern of a light wave passing through an aperture of a similar size to the wavelength?

A

You get a diffraction pattern of dark and light fringes. The pattern has a bright central fringe with alternating dark and bright fringes on either side of it.

62
Q

Which fringe is the most intense? What does more intense, in this context (light diffracting though slit), mean?

A

Central fringe There are more incident photons per unit area in the central fringe than in the other bright fringes

63
Q

The [] the slit, the [] the diffraction pattern

A

Narrower, wider or wider, narrower

64
Q

Describe the phase of the waves at the brightest point of a diffraction pattern. Where has the wave travelled to get to the brightest point?

A

Where light passes in a straight line from the slit to the screen All the light waves that arrive there are in phase

65
Q

Describe the phases of the waves that don’t arrive at the brightest point, but at other bright points. Phasors? Resultant phasor size?

A

There is a constant phase difference between the waves arriving there, so the phasors point in slightly different directions and form a smaller resultant

66
Q

Describe the phase difference of the waves at the dark fringes on the screen

A

The phase difference between the light waves means their phasors add to form a loop, giving a resultant of zero

67
Q

Why is it easy to demonstrate to source interference for either sound of water?

A

Because they’ve got wavelengths of an easy size that you can measure

68
Q

How do you demonstrate to you source interference with water or sound?

A

You need coherent sources (wavelength and frequency the same), eg. use the same oscillator to drive both sources. For water, one vibrator drives to dippers. For sound, one oscillators connected to loudspeakers

69
Q

What are the two ways of demonstrating to source interference for light?

A

Use to coherent light sources, or use a single laser and shine through two slits (Young’s double slit experiment)

70
Q

Describe the laser light used for Young’s double slit experiment

A

Laser light is coherent and monochromatic, there’s only one wavelength present

71
Q

Describe the slits for Young’s double slit experiment

A

They have to be about the same size as the wavelength of the laser light to say that it is defective – then the light from the slits acts like 2 coherent point sources

72
Q

What pattern do you get from the Young’s double slit experiment?

A

Light and dark fringes, depending on whether constructive or destructive interference is taking place

73
Q

What is the path difference at the first, central, light fringe in Young’s double slit experiment?

A

Zero

74
Q

What is the path difference of the second light fringe? In Young’s double slit experiment

A

λ

75
Q

What is the path difference of the first dark fringe? Young’s double slit experiment

A

λ/2

76
Q

How can you adapt Young’s double slit experiment to observe interference patterns with microwaves?

A

You can replace the laser and slits with two microwave transmitter cones attached to the same signal generator You need to replace the screen with a microwave receiver probe If you move the probe perpendicular to the direction of the waves, you’ll get an alternating pattern of strong and weak signals – just like the light and dark fringes on the screen

77
Q

What helps to lower the percentage error when calculating the fringe spacing in Young’s double slit experiment?

A

The fringes are so tiny that it’s very hard to get an accurate value of X. It’s easier to measure across several fringes then divide by the number of fringe widths between them

78
Q

What was Young’s experiment evidence for?

A

The wave nature of light

79
Q

Which phenomena can corpuscular theory explain?

A

Reflection and refraction, but diffraction and interference are both uniquely wave properties

80
Q

What is corpuscular theory?

A

Newtons theory suggesting that light was made up of tiny particles, which he called corpuscles

81
Q

What happens when you repeat Young’s double slit experiment but with more than two equally spaced slips?

A

You get the same shaped pattern as the two slits – but the bright bands are brighter and narrower, and the dark areas between are darker

82
Q

What is the advantage of using a diffraction grating with hundreds of slits per millimetre over two slits?

A

When monochromatic light is passed through a grating with loads of slits, the interference pattern is really sharp because there are so many beams reinforcing the pattern. Sharper fringes make for more accurate measurements

83
Q

Diffraction grating is: What is the line of maximum brightness called?

A

The 0 order line

84
Q

For [] light, all the maxima are sharp lines

A

Monochromatic (Different for white light)

85
Q

How do you describe the bright lines from diffraction grating patterns?

A

The lines either side of the central one are called first order lines. The next pair out are called 2nd order lines and so on

86
Q

Describe at what wavelengths you get the lowest resonant frequency for closed-ended, and open-ended instruments

A

You get the lowest resonant frequency when the length of the pipe is a quarter wavelength If both ends are open, you get the lowest resonant frequency when the length of the pipe is a half wavelength

87
Q

Investigation of speed of sound using standing waves: How can you tell when the sound resonates?

A

This will be when the sound appears loudest

88
Q

When does refraction happen?

A

When a wave changes speed at a medium boundary

89
Q

Explain refraction

A

When a ray of light meets a boundary between one medium and another, some of its energy is reflected back into the 1st medium and the rest of it is transmitted through into the 2nd medium

90
Q

What does the amount of refraction depend on? What does this imply about focal length?

A

The wavelength of the light - therefore the focal length for a given lens will change depending on wavelength

91
Q

Describe how density and speed affect/are affected by refraction

A

If light meets the boundary at an angle to the normal, the transmitted ray is bent/refracted as it travels at a different speed in each medium The more optically dense a material is, the more slowly light travels in it

92
Q

what do phasors have the same frequency as, and how do you determine the length of the phasor

A

phasors have the same frequency of the wave

the amplitude of a wave is the length of the phasor