ABH3 study guide Flashcards
1
Q
3M consists of what two subsystems
A
PMS planned maintenance system
MDS maintenance data system
2
Q
What are the 3 types of scheduling to control maintenance
A
Cycle, Quarterly, Weekly
3
Q
What are the two types of maintenance
A
Corrected and preventative
4
Q
What does LOEP stand for?
A
List of effective pages
5
Q
What is LOEP?
A
List each separate and independent system in the control of your individual work center, outlining maintenance index pages listed in your work center
6
Q
What does MIP stand for?
A
Mainenance index page
7
Q
What is MIP?
A
Prepared and issued for each installed system for PMS support established. Each is an index of all applicable maintenance required cards to a ships system, subsystem, and equipment.
8
Q
What are MRC cards
A
Provide the detailed procedures for performing the preventative maintenance and state who, what, when and how the action is to be preformed
9
Q
What does EGL stand for?
A
Equipment guide list
10
Q
What is the EGL?
A
Accompanies the MRC to serve as location guides for identical equipment requiring the same PMS
11
Q
What is the Accountability Log
A
Contains 13 weeks of scheduled planned maintenance accounted by the individual’s
12
Q
the blade of the standard screw driver should fill ___ of the screw slot.
A
75%
13
Q
philips screw driver should fill ___ of the screw slot.
A
100%
14
Q
reed and price screws are generally used in…
A
air frames
15
Q
when using a wrench you should always apply twisting force from…
A
the fixed jaw
16
Q
which torque wrench makes an audible click when you reach desired torque
A
micrometer
17
Q
hack saws cut on the ____ stroke
A
push
18
Q
hack saw blades should be installed facing ______ from the handle
A
away
19
Q
electric extension cords used with portable power tools should be no longer that ____ feet and no more that ___ cords connected together
A
25, 2
20
Q
Block and tackle: Sheave is…
A
the wheel over which the rope runs
21
Q
block and tackle: Swallow is…
A
the opening through which the rope passes
22
Q
block and tackle: Strap is…
A
the frame work that holds the block together and supports the pin on which the sheave rotates
23
Q
block and tackle: Fall is…
A
the rope that runs through the block and tackle
24
Q
block and tackle: Hauling…
A
the part of the fall leading from one of the blocks upon which the power is exerted
25
block and tackle: Standing part...
the end of the fall that is attached to one of the blocks
26
block and tackle: Running block...
the block that is attached to the object to be moved
27
nylon rope is...
synthetic fiber that stretches under load and yet will recover to normal size
28
what is the critical stretch point of nylon rope
40%
29
at what stretch point will nylon rope part
50%
30
what is safe working load of nylon rope
1/3 or 40%
31
small stuff refers to
1-3/4 in or smaller
32
HAWSER refers to
5 inches or larger
33
stabilizing lines
4 each, 50 foot length intended for attachment between aircraft and crane to prevent oscillations while the load is suspended in transit from the salvage site
34
tag lines...
4 each, 100 foot lengths, these are hand help stabilizing lines
35
securing lines...
sufficient quantity and random lengths. these are used to secure equipment such as an aircraft to a dolly and a dolly to flight deck during jettison.
36
tending lines...
4 each, 100 foot in length these are used primarily for personal safety when using safety harness
37
wire rope
made of single wires twisted together to form strand, these are in turn twisted together in the opposite direction to form the wire rope
38
performed
a performed wire, each strand is shaped so that it lies in with the others, the way a stand does in a line makes wire more flexible
39
spring lay
often used for wires that requires a good deal of handling, such as mooring wires each strand in spring lay in composed partly of wire and partly fiber, this construction increases the flexibility but reduces the strength of spring lay considerably compared to that of an steel wire rope
40
A/S 32A-30A used primarily
for towing mobile support equipment such as starting units, mobile electric power plants, work stands, and other tractors. secondary mission to tow light aircraft and helps and munition trailers. Shore based and used in hangers and warehouses.
41
weight of 32A-30A
6970 LBS
42
fuel capacity of 32A-30A
12 gal
43
32A-30A towing capacity
40,000
44
32A-30A turning radius
142"
45
32A-30A tire pressure
50 psi
46
32A-32 is primarily used
in hanger bay (Spotting dolly)
47
32A-32 gross weight
11,500
48
32A-32 draw bar pull
14,000
49
32A-32 maximum lifting capacity
16,000
50
32A-32 maximum speed loaded and unloaded
2 mph loaded
| 5 mph unloaded
51
32A-32 turning radius
0"
52
32A-32 ground clearance
5"
53
32A-31A primarily used...
Flight deck
54
32A-31A gross weight
12,400
55
32A-31A ground clearance
7 1/2
56
32A-31A draw bar pull
8,500
57
32A-31A front and rear tire pressure
70 psi and 60 psi
58
32A-31A fuel capacity
85 gals
59
32A-31A turning radius
132"
60
32A-42 is primary used for...
Aircraft Mid Range Tow Vehicle is shore based tractor designed for towing aircraft weighing up to 100,000 lbs
61
NWC-4 is..
aircraft wheel chock
62
NWC-4 is adjustable up to
45 inches
63
metal chocks are authorized for use ashore (T/F)
FALSE
64
shore stations chocks are found in three sizes that are...
tires less than 33", tires over 33", and duel wheel chocks
65
TD-1A safe working load
10,000
66
TD-1A incorrectly installed working load
6000
67
TD-1A can be adjusted from...
1.6 ft.in to 9.10 Ft. in
68
Aero full-power tie down has a working load of ____ and wights ____
30,000 and 102
69
deck tie downs have a working load per bar of ______
18,000
70
deck tie towns have a overall vertical tie down of ______
36,000
71
A/S 32A-37
shore based tractor used to move large heavy shore based aircraft available in two configurations, class 1 and class 2
72
A/S 37A-3
shipboard mobile electric power plant (MEPP) replacement for NC-2A designed to provide 115 volts, 3 phase, 400hz or 28 vdc electrical power for aircraft onboard ships
73
A/S 37A-3 gross weight
5060
74
A/S 37A-3 turning radius
13 Ft
75
A/S 37A-3 fuel cap
18
76
A/S 37A-3 hydralic drive pressure
1500
| 2400 max
77
A/S 37A-3 length, width, height
102 Length
58 Width
45 1/2 Height
78
A/S 37A-3 ground clearance
7"
79
ALBAR stands for
adjustable length towbar
80
ALBAR 8 length and weight
9 feet, 128 lbs
81
ALBAR 15 length and weight
15 feet, 170 lbs
82
ALBAR 20 length and weight
20 feet, 218 lbs
83
ALBAR 24 length and weight
25 ft, 255 lbs
84
albar towing cap
8,15,24 - 90,000 LBS
| 20 - 20,000 LBS
85
what aircraft is ALBAR 24 intended for
SH-60 helo
86
what aircraft is albar 8 intended for
H-46 shipboard CH-53E with IFR probe
87
what is albar 15 intended for
```
AV-8 shipboard C-2, E-2, FA-18, H-46 land,
CH-53e without IFR probe
T-6, T-34, T-44,
TH-57 exchange fittings,
UC-12, MV-22 without probe
```
88
what aircraft are albar 20 intended for
land based AV-8, TAV-8, FA-18, CH-53E, MV-22
89
shelf life of non skid
12 months
90
long term storage temp of non skid
55-100
91
24 hours prior to mixing non skid primer or color topping temp
70-80
92
ambient air temp to lay non skid
55-100
93
deck temp to lay nonskid
55-100
94
relative humidity non skid
85%
95
dew point to lay non skid
deck temp must me 5 degrees above dew point
96
type I non skid
high durability
| rollable deck coating
97
type II non skid
standard durability
| rollable or troweled deck coating
98
type III
standard durability
rollable resilient deck coating for use on exterior wooden decks, GRP, or metal decks where flexability is required and where increased weight is not a factor.
99
type IV
standard durability
| sprayable deck coating
100
type I comp G service life and comp L landings
12 months (G) and 10,000 landing (L)
101
type II comp G service life and L landings
6 months, Landing 5000
102
type III and IV service life
6 months
103
composition G is
general use and has abrasive coating available in each system
104
composition L is
limited use non abrasive used on CV/CVN landing areas only found in type I and type II systems
105
what is abrasive blast
the process in which the non skid coating is removed and a 3 - 4.5 mil profile is left in deck metal.
106
what is the most effective method of removing non skid
centrifugal blasting
107
what is centrifugal blasting
steel shot being thrown at the coating by the use of a vaned wheel
108
what technique eliminates dust, pollution, and disposal requirements
hydro blasting
109
what is hydro blasting
fresh water striking the surface to remove existing coating
110
hydro blasting operates at what pressures
10,000-25,000 psi
111
advantages of hydro blasting
no dust pollution, less waste to dispose, illumination of FOD and less disruption to other ship work
112
non skid primer should be stored at what temps
70-80 degree for 24 hours prior to mixing
113
what is the desirable dry film thickness (DFT)
2 to 4 mil
114
what is primer cure time
between 6 to 12 hours
115
after surface is blasted, primer should be applied...
as soon as possible less than one hour
116
if it has been fewer than 36 hours since the surface has been blasted what action should you take before applying primer
inspect surface, clean or dry as need
117
if it has been between 36-72 hours since the surface has been blasted what action should you take before applying primer
wipe surface with lint free rag and solvent
118
if it has been between 3-7 days since the surface has been blasted what action should you take before applying primer
```
wipe surface with lint free rag
solvent lightly
sand surface
repeat wipe down
apply a primer tack coat (1-2 mils)
```
119
if it has been more than 7 days since the surface has been blasted what action should you take before applying primer
reblast area to a near white surface
| reprime
120
for max performance non skid should be applied within __ hours of primer coating
36
121
the targeted surface profile of properly cured non skid should be between ___ minimum to ___ maximum
1/32" and 1/16"
122
T/F. spraying of non skid is authorized on the flight deck
FALSE
123
who's guidance must you get before using trowel to apply non skid
TYCOM
124
do not apply nonskid within __ of deck edge and within __ of padeye
5" 2"
125
how long should non skid cure before allowing foot traffic
24 hours
126
how long should non skid cure before allowing vehicular traffic
96 hours
127
when is non skid fully cured
7 days
128
VLA: catwalk platform landing
rectangular box laid out with 2" white boarder
| length determined by size of platform
129
VLA: centerline
36" wide alternating
45 foot long
yellow and white segments
130
VLA: catapult safe parking or shot lines
42ft from center of cat line starts forward JBD runs to deck edge bow cats shall have 2'' wide lines of alternating red and white 72'' segments waist cats shall have 2'' yellow lines
131
VLA: catapult aircraft aligning marks
used to align aircraft on cats marking shall be 2'' wide and 10 ft long markings are white except when they interfer with ladder lines then they shall be yellow
132
VLA: catapult steam smothering markings
black in color with 3'' white letters "STEAM" 18" wide on the coaming when painted on non skid 5'' white letters
133
VLA: JBD
6" wide yellow lines surrounding it
134
VLA: barricade stanchion
4" border alternating red and yellow
135
VLA: safe parking lines
foul line 2" line with 72" alternating red and white
136
VLA: AFFF
green white 3'' letters AFFF 8'' on coaming
137
VLA: ship identification number
37. 5 foot high on flight deck using 4" wide white outline top of the number should start 8 feet aft of bow 30" from centerline
138
all hanger deck markings are __ feet from deck
14
139
VLA: hangerdeck AFFF
18" green square with 5" white letters
140
hanger bay frame numbers are placed in __ frame intervals
10
141
a smoldering fire is
the beginning and is not growing in size or intensity
142
a flaming fire is
size and intensity increases to a rapid self sustaining combustion
143
what is heat
produced by a chemical chain reaction called oxidation
144
what is fuel
could be a solid, vapor, or a liquid
145
what is oxygen
a fire need oxygen to breath
146
alpha fire
solid materials wood, paper, clothes,
147
how to extinguish alpha fire
water at low or high velocity fog pattern
148
bravo fire
fuels
149
extinguish bravo fire
AFFF, PKP, CO2, halon 1211
| NEVER use water it will spread the fuel
150
charlie fire
electric
151
extinguish c fire
shut off power to equipment
| CO2, PKP as last resort
152
delta fire
combustable metals
153
extinguish d fire
water in large quantities
154
halon 1211 discharge temp
0-15 F
155
halon 1211 is not effective on ____ fires
delta
156
halon 1211 is identified by a _____ __ band on bottle
silver 6"
157
PKP used on _____ fires and last resort on _____
bravo and charlie
158
PKP is compatible with ____
AFFF
159
PKP is identified by _____ __ on bottle
purple 6"
160
AFFF is _____ colored and _____ liquid
amber, syrupy
161
AFFF is used primarily on _____ and effective on ____
bravo and alpha
162
AFFF can be used with
halon 1211 PKP and CO2
163
CO2 is a
colorless, tastless, oderless gas non corrosive
164
CO2 is discharged at ___ degrees
-110 F
165
CO2 has an expansion rate of
450 to 1
166
CO2 primarily used on ___ but can be used on ___ fires
charlie and bravo
167
CO2 can be identified by a _____ __ band on bottle
yellow 6"
168
what is a flash point
temperature at which oil or fuel will give off a vapor that will flash or burn momentarily when ignited
169
flash point of aviation gas and spread rate
-50 degrees
| 700-800 feet per minute
170
flash point of jp-4 and spread rate
-10 degrees
| 700-800 feet per minute
171
flash point of jp-5 and spread rate
140 degrees
| 100 feet per minute
172
flash point of jp-8 and spread rate
100 degrees
| 100 feet per minute
173
LOX boils into gaseous oxygen at
-297 F
174
TMU-70M is a LOX tank used...
aboard ship
175
the LOW trailer 50 gallon type no 4 is used
ashore
176
three parts of a LOX cart
50 gallon storage tank,
| 4 gallon transfer tank a system of lines and control valves
177
anti icing fluids have a mixture of ___ alcohol and ___ glycerin
85% and 15%
178
anti icing fluids burn with
an invisible flame
179
rummer tires ignite at
500-600 degrees
180
how should wheel fires be approched
45 degree angle
181
what aircraft have carbon graphite fibers
F/18 and AV-8B
182
at what degree with epoxy binders ignite and be released into the air
752
183
1 1/2 non collapsible hose GPM, how many people man the hose
125 GPM and 3-5
184
2 1/2 collapsible hose GPM, how many people man the hose
250 GPM and 5-7
185
TAU is
twin agent unit fire extinguishing duel agent apparatus
186
TAUs are used on ____ fires and have ____ and ___
bravo, AFFF, PKP
187
TAU agents are propelled by ____ cylinder
nitrogen
188
TAU-2 and TAU-2A are
frame mounted unit for ship use
189
TAU is
mounted on the rear of a tow tractor or trailer
190
TAU-2 contains ___ gal of AFFF premixed solutions and ____ pounds of PKP
80, 200
191
TAU-2a contains ___ gallons of AFFF and ___ of pkp
86, 200
192
A/s32P-16A (P-16/A) is powered by
2 cycle 4 cylinder liquid cooler diesel engine and contains hydrostatic drive system with front wheel power steering
193
A/s32P-16A (P-16/A) has _ storage tanks designed to carry ____ gals of AFFF and ____ lbs of Halon 1211.
P-16/A has 2 storage tanks
375 gals AFFF,
400 lbs of halon 1211
194
A/s32P-16A (P-16/A) is equipped with __ foot twinned hose handline a single ___ ft handline and a driver operated turret
80, 100
195
P-25s water tank carries ____ gallons
750
196
P-25 carries __ gallons of AFFF
60
197
P-25 has __ fire hose fittings
2
198
P-25 has __ halon bottles
3
199
the p-25 handline is
100 feet long,
| 1 1/2 non collapsible that has 95 gpm
200
A/S32A-36A is
amphibious assault ship crash crane AACC
201
A/S32A-36A AACC has a lifting cap of
70,000
202
A/S32A-36A AACC idles at
900 rpm
203
A/S32A-36A AACC operates at ____ rpm
1800
204
A/S32A-35A is
carrier vessel crash crane CVCC
205
A/S32A-35A CVCC main hoist lifting speed of
0-60 feet per minute unloaded and 0-20 loaded
206
A/S32A-35A CVCC maximum travel speed of __ unloaded and ___loaded
5, 3
207
20-K is
crash fork lift
208
crash fork lift has a maximum safe lifting cap of _______ at ___ load centers
20,000 at 24''
209
aircraft crash dollies are capable of supporting _____ lb loads
32,000
210
new E-28 tape has a breaking strength of
150,000
