From what distance are cabinets viewed from?
18”
Drawers are to open and close smoothly with no ___________.
Binding
Drawer fronts and doors to alight and plane within ________ of an inch to any adjacent drawer, door or false front.
1/16”
Minimum of ________ bumper pads at each drawer and doors under 4’.
2
Chips, dings or scratches on a shelves, drawers or cabinet boxes can be puttied up to ________ of an inch.
1/16”
Damage on drawer and cabinet boxes over ________ of an inch require re-skin/replacement.
1/16”
Doors taller than ________ feet require latches.
4’
Doors are not to have loose __________.
Hinges
What’s the tolerance for rattling door panels.
No tolerance
Warped doors are not to exceed ________ of an inch from top to bottom.
1/8”
How many shelf clips should be at each end of a shelf?
2
How many shelf clips should be at the center of a shelf?
2
Delamination of melamine requires _____________.
Replacement
The minimum length of a trim piece is ________ feet.
2’
All nail holes and unused screw holes to be filled with _________ _________.
Matching putty
All shims to be ___________ _______ with cabinet box.
Cut flush
All _________ ___________ to be removed from cabinet boxes.
Shipping staples
____________ and __________ _________ to be cut tight.
Cleanouts
Water lines
What’s the tolerance for chips, dents, defects, scratches and splits in the finish of all cabinets?
No tolerance
What’s the tolerance for bubbles, runs or rough finish on cabinets?
No tolerance
What’s the tolerance for water damage?
No tolerance
Wood tops to be cut tight to drywall with a maximum gap of _______ of an inch.
1/8”
