Chapter 4 UREs Flashcards
- (223) What subsystem within the ground Minuteman automatic test station (GMATS) is used to measure and interpret data received from the UUT?
A. Computer group
B. Distribution group
*C. Instrumentation group
D. Power and switching group
- (223) How many bays and subsystems make up the ground Minuteman automatic test station (GMATS)?
A. Three bays and three subsystems
B. Three bays and four subsystems
*C. Four bays and three subsystems
D. Four bays and four subsystems
- (224) What type of power does the generator room supply the 82 Bench workbench?
A. 120/208 VAC, 60-Hz only
*B. 120/208 VAC, 60-Hz and 400-Hz
C. 120 VAC, 60-Hz and 400-Hz
D. 120 VAC, 400-Hz only
- (224) What 82 Bench component enables cooling air to be supplied to an electronic drawer?
A. UUT manifold
B. Cooling air test adapter
C. Cooling air test set
*D. Holding fixture
- (225) Which of the following is not operationally certified by the nuclear certification test station (NCTS)?
*A. RMB32 modules
B. Weapon system process (WSP)
C. Single module computer 810 (SMC-810) circuit card assembly (CCA)
D. Extended memory array dynamic (EMAD) CCA
- (225) The Nuclear Certified Test Station requires how many mobile work platforms (MWP)?
A. 1
*B. 2
C. 3
D. 4
- (226) While on alert at a LF, the MGS continuously
A. sends guidance and navigation signals to the propulsion system rocket engine (PSRE).
B. monitors and reports launch tube temperatures to the launch control facility (LCF).
C. sends guidance and navigation signals to the missile.
*D. monitors and reports missile status to the LCF.
- (226) What do the elastomer connector shields protect the cable connectors in a MGS from?
A. Acid bloom
*B. Radiation effects
C. ESD
D. Damage such as nicks and scratches
- (226) What item mounted to the MGSTS mobile console assembly has banana pin jacks that can be used to test the SRAM battery?
*A. Test point panel
B. Power control panel
C. Power distribution panel
D. Programmable DC power supply
- (226) Which of the MGSTS components consists of devices that must be replaced, not repaired, if they become defective?
A. External cables
B. Umbilical plug assembly
C. Mobile console assembly
*D. Certification test controller (CTA) assembly
- (226) During the MGS certification procedure, how many times can the certification be performed on the same MGS?
A. No more than four in a 24 hour period.
B. No more than four in a 48 hour period.
*C. No more than six in a 24 hour period.
D. No more than six in a 48 hour period.
- (227) The missile maintenance test set (MMTS) is used for off-line testing of LRUs related to
*A. strategic automated command and control system (SACCS) equipment.
B. rapid execution and combat targeting (REACT) equipment.
C. HICS equipment.
D. support information network (SIN) equipment.
- (227) What are the missile maintenance test set (MMTS) test stands normally equipped with that are identical to the LRUs installed at a LLC?
A. Critical items
B. Compatible items
*C. Configuration items
D. Communication items
- (228) Which component of the shielded enclosure (SE) has a honeycomb construction to provide emissions security (EMSEC) integrity?
A. Pneumatic door
B. Power line filters
*C. Air conditioning filters
D. Fiber-optic communication link housing
- (228) Which type of wing code processing (WCPS) start up is from the system disk?
A. Initial
*B. Normal
C. Cold start
D. Safe mode
- (228) Which of the following components on the WCPS are in the red-sensitive area?
A. Bays 1 and 2, and the CRT keyboard
B. Bays 3 and 4, and the CRT keyboard
*C. Bays 5 and 6, and the CRT keyboard
D. All components
- (228) What device would automatically dissipate if it were to be partially removed from its mounting location?
A. LEP
B. LCP
C. CCV
*D. MCU
- (229) What hardware certification verification equipment (HCVE) test is more user-friendly?
A. Off-line diagnostics test
*B. On-line diagnostics test
C. Automatic test
D. Self-test
