Controllers Flashcards
How many measured values can be shown on the MET800 series display?
3
you can also show the totalizer at the bottom
How many measurements can be stored on the SD card in the VEGAMET86x?
170K
The new VEGAMET’s are for water and wastewater industry.
True
they can be used in other industries but primary for W and WW
The VEGAMET 862 can power and support how many 4-20 mA HART sensors.
2
The new VEGAMETs are considered Signal Conditioners.
False
The new VEGAMET 800 series can be commissioned or set up with?
Bluetooth
VEGAMET Commissioning has Four Golden Rules: Installation/Mounting, Application, Adjustment and
False Signal Suppression
True or False: The two types of applications most commonly used for VEGAMET’s are Parshall Flume and V-notch Weir.
True
In a V-notch Weir, it is recommended that the sensor is mounted at least ____ times the maximum head height.
4
Where is the 0 reference point of the PULS C21 and PULS31?
Tip of the antenna cover
The VEGAPULS 69 provides the following features:
Non Contact measurement
Non mechanical measurement
Tight beam angle <4degrees
The most meaningful way to determine weight is to transfer known weight of material into a silo and adjust the scale.
Certainty (repeatable and reliable)
A VEGA cellular gateway provides:
Ability to configure troubleshoot the measurement devices remotely
the ability to be completely separate from the plant’s network
a wireless connection to the internet for inventory data transmission
The VIS portal provides easy access to real-time inventory to
those with the authorized access (UN and PW)
Not a cementitious material
admixture
From a logistics optimization standpoint, inventory “certainty” is more important than inventory “accuracy”.
True
Not a good application for VIS?
weight measurement for batching purposes
China produced more concrete in 3 years than the US did in the 20th century
True
The VEGAPULS 69 measures
distance
Not a good application for VIS
High and low level alarming
Operator interface to the plant process
How many radars can be connected to a VEGASCAN 693 with the EX output option (Single chamber sensors that must be set to HART Multidrop with unique addresses)?
5
What is / are the primary function(s) of the VEGATOR 100 Series?
Switching and isolation/barrier
How many radars can be connected to a VEGASCAN 693 (Single chamber sensors that must be set to HART Multidrop with unique addresses)?
15
What is the maximum wiring distance for a VEGADIS 81?
50m