FO Flows

Question 1

FO Before Push Flow

Answer 1

Boarding complete:
1 Hydraulic pumps… Checked, On (monitor system page)
2 Doors… closed

Ready to push:
3 Transponder / push clearance… XPNDR/Requested

Cleared to push:
4 Pushback Clearance beacon… Received, on
5 Sterile Light… On

Question 2

FO After Start Flow

Answer 2

1 Flap Lever … Set
2 Probe Heat... on
3 Anti-ice... as req.
4 (800,900,9ER,MAX) Trim Air... as req.
5 Air Cond and pressurization... Set
6 APU Switch... As req. 
7 Recall... Checked
8 Autobrakes... RTO
9 Audio Control... Set

Question 3

Delayed Eng. Start Flow

Answer 3

1 Generator(s)... On
2 Anti-Ice… As Req
3 (800/900/9ER/MAX) Trim air… ON
4 Air Cond and Pressurization... set
5 APU... As Req
6 Recall... Checked

Question 4

FO Before Takeoff Flow

Answer 4

1 FWM... Review
2 ACARS t/o data...  verify
3 FMC... verify
4 Flaps... set
5 Trim... set
6 MCP... set
7 Radar/terrain... As required 
- - - Final Items - - -
8 Dep. announcement... Complete
9 Transponder... TA/RA
10 Start Switches... Continous 
11 Air cond and pressurization... set
12 Recall... Checked

Question 5

After Takeoff Flow

Answer 5

1 Flaps
2 Gear
3 Autobrake
4 Engine Start Switches 
5 Engine bleeds and packs
6 Pressurization
7 APU

Question 6

Descent Flow (PM)

Answer 6

1 Pressurization... set
2 Recall... checked
3 Landing dist. And autobrake... checked, set
4 Refrence speeds... set
5 FMC, radio... set
6 Flight instruments... set
7 Terrain, radar displays... as req. 
8 Altimeters... set

Question 7

Landing Flow

Answer 7

PM
1 Speed brake… Armed
2 Start Switches… Cont
3 Gear… down
4 Flaps… As Req.

PF
Speed brake… Armed

Question 8

FO After Landing Flow

Answer 8

1 Flaps... Up
2 Stab Trim... Set (5.0)
3 Autobrakes... off
4 Radar... off
5 Flight Directors... off
6 Start Switches... as req
7 Wing anti-ice
8 Engine anti-ice as req
9 Probe Heat... as req
10 Trim Air... Off
11 Transponder... XPNDR
12 Radar Mode Selector... test
13 APU... Start, on busses

Question 9

FO Parking Flow

Answer 9

1 Parking brake... verify set
2 Electric power,.. ensure
3 Eng. start levers... cutoff
4 Start Switches... off
5 Sterile light... off
6 Beacon... off
7 APU bleed... as req
8 Air Cond. ... set
9 Hydraulic system... set
10 Anti-ice... off
11 Probe heat... Off/auto
12 WiFi switches... set 
13 Transponder... Standby

Question 10

Single Engine taxi - Into the gate

Answer 10

For aircraft cooling on taxi in per AB 21-237:

Start APU
Shut Down Engine #2
Both Packs High Flow
Verify ISOL is in AUTO
Both ENG Bleed Switches to OFF

Then when parked:
Select external power when available. Leave the APU running, return the PACK switches AUTO, select both RECIRC FAN switches in AUTO, and return the ENGINE BLEEDS to ON.

Question 11

Descent Flow (PF)

Answer 11

1 Landing distance and autobrakes… set 
2 Reference Speeds… set
3 FMC, radios… set
4 Flight Instruments… set
5 Terrain, radar displays… As Req
6 Lights… on
7 Altimeters… set