Instruments 1

Question 1

Course Intercept Steps (memorize)

Answer 1

1.Tune, Identify, Monitor
2. Set the course
3. For inbound course intercepts check for a ‘To’ indication.
4. Turn in the shorter direction.
5. Continue the turn to place the Course Arrow in the top half of the HSI.
6. Roll out on an intercept heading.
7. Bug your heading (optional)

Question 2

For inbound intercepts:

Answer 2

CB + 30 not to exceed 90 degrees

Course arrow to bearing (VOR) pointer + 30 degrees

Question 3

For outbound intercepts:

Answer 3

TC + 45

Up to 45 with your heading not going past the VOR bearing pointer.

Question 4

The control and performance concept

Answer 4

Establish, Trim, Cross-Check, Adjust

Question 5

Trim order

Answer 5

Rudder, elevator, aileron

Question 6

Bearing pointer 3 Rules

Answer 6

1. Bearing pointer head falls.
2. Bearing pointer tail rises.
3. Our radial is on the bearing pointer tail.

Question 7

EHSI Orientation Steps

Answer 7

1. Where is Bearing Pointer tail?
2. Visualize the quadrant the quadrant you’rein.
3. Determine heading.

Question 8

60 to 1 rule

Answer 8

60 / DME = # of radials per NM

Question 9

Turn Radius equation

Answer 9

TR = (TAS/60) - 2

Question 10

Speed in NM/min

Answer 10

= Knots/60

Question 11

Pitch change

Answer 11

= Alt to loose/Available distance

Question 12

Vertical speed

Answer 12

Speed in (NM/min) x Pitch change x 10

Question 13

Approx TAS

Answer 13

MSL FL Alt / 2 + IAS

Question 14

Descent Gradient

Answer 14

Alt to loose / distance to loose it

Question 15

Turn Radius/range

Answer 15

= (Grd Spd)/60 - 2
Or
= Mach - 2

Question 16

Unusual attitude recovery

Answer 16

Recognize, confirm, recover

Question 17

Inst Slow Flt

Answer 17

110-120
3 degrees NH
LDG GR Dwn
Flaps.- T/O