J-2-2-30-1 F15 Eagle

Question 1

What should be reviewed prior to conducting EOD operations?

Answer 1

Electromagnetic radiation (EMR) hazards and precautions, and electrical grounding procedures

Refer to the applicable portion of the 60-series manual on general EOD safety precautions.

Question 2

What precaution should be taken regarding aircraft engine intakes?

Answer 2

Block intakes with vehicle or have personnel use a lifeline during approach if engines are running.

Question 3

What is a hazard associated with jet intake suction?

Answer 3

Jet intake suction is extremely hazardous.

Question 4

What must be done before personnel can be under the aircraft?

Answer 4

Clear all personnel from under the aircraft until the landing gear safety pins can be inserted.

Question 5

What should not be actuated on the aircraft?

Answer 5

Any armament switches.

Question 6

Does the installation of the MAU-12 bomb rack safety pin prevent the ejector rack cartridges from firing?

Answer 6

No.

Question 7

What should be avoided when gaining access to and safing aircraft systems?

Answer 7

Working directly under AN/ALE-45 dispensers.

Question 8

What must be ensured before handling impulse cartridges?

Answer 8

All personnel must be grounded.

Question 9

What is the safe approach direction for an ejected seat containing an unfired drogue gun?

Answer 9

From a safe direction.

Question 10

What happens if the emergency manual chute deployment handle is pulled?

Answer 10

It will initiate the emergency power supply, firing the backup mortar cartridge.

Question 11

What type of explosive device is used in the UWARS and SEAWARS systems?

Answer 11

Electrically activated explosive device (EED).

Question 12

What must be done when closing main landing gear doors to prevent structural damage?

Answer 12

The socket wrench hex key must not protrude from the aft side of the uplatch hook.

Question 13

What is the primary function of the ACES II ejection seat?

Answer 13

Emergency escape from the aircraft.

Question 14

What are the two systems that the ACES II ejection seat can be equipped with?

Answer 14

Seawater activated release system (SEAWARS) and universal water-activated release system (UWARS).

Question 15

How quickly does the UWARS unit operate after being immersed in water?

Answer 15

Within 2.5 seconds.

Question 16

What is attached to the undersurface of the ACES II seat pan?

Answer 16

A survival kit.

Question 17

What are the main power sources for the aircraft’s electrical system?

Answer 17

Two main alternating current (ac) generators and an emergency ac/dc (direct current) generator.

Question 18

What type of landing gear does the aircraft have?

Answer 18

A fully retractable tricycle landing gear.

Question 19

What is the function of the arresting hook on the aircraft?

Answer 19

It is electrically controlled and pneumatic-hydraulically operated.

Question 20

What is the firing rate of the M61A1 gun?

Answer 20

4,000 or 6,000 rounds per minute.

Question 21

What does the MAU-12C/A bomb rack utilize for safing?

Answer 21

Electrically fired impulse cartridges and a mechanical safety pin.

Question 22

What does the LAU-114/A missile launcher provide capabilities for?

Answer 22

Suspension and release of AIM-9 series (Sidewinder) missiles.

Question 23

What is the purpose of the BRU-26A/A bomb ejector rack?

Answer 23

To release stores by gas pressure from electrically initiated cartridges.

Question 24

What type of fuel tanks are mounted on the aircraft?

Answer 24

Conformal fuel tank (CFT).

Question 25

What is the primary function of the AN/ALE-45 countermeasures dispenser?

Answer 25

To carry flare/chaff cartridges.

Question 26

What is the maximum capacity of the liquid oxygen (LOX) system?

Answer 26

2.6 gallons (10 liters).

Question 27

What is the capacity of the LOX system?

Answer 27

2.6 gallons (10 liters) ## Footnote LOX stands for Liquid Oxygen.

Question 28

What is the maximum pressure for the LOX system?

Answer 28

120 psi (827 kilopascals) ## Footnote psi stands for pounds per square inch.

Question 29

How long is the emergency oxygen supply on the ejection seat?

Answer 29

10 minutes ## Footnote The oxygen supply is furnished by an emergency oxygen bottle.

Question 30

What is the hydraulic pressure in the aircraft's hydraulic system?

Answer 30

3,000 psi (20,685 kilopascals)

Question 31

Where are the hydraulic system powered jet fuel starter accumulators located?

Answer 31

Under door 89L

Question 32

What items are included in the survival kit attached to each seat pan?

Answer 32

* Carbon dioxide cylinder for life raft inflation * Locking cord cutter * Day and night signals

Question 33

What should be done before starting downloading procedures?

Answer 33

The aircraft should be chocked and grounded.

Question 34

What is the first step in unloading the M61A1 Internal Gun System?

Answer 34

Ensure gun safing switch pin is installed.

Question 35

What must be done to the gun barrel cluster before rotation?

Answer 35

Install a clearing sector tool.

Question 36

True or False: The gun can be rotated in any direction.

Answer 36

False ## Footnote The gun must be rotated in a clockwise direction only.

Question 37

What happens if oversized spent cases are chambered?

Answer 37

They will cause a jam.

Question 38

What should be done with the loading adapter unit lockpins during the downloading process?

Answer 38

Push in and rotate one-half turn in either direction.

Question 39

Fill in the blank: The _______ is used to catch rounds under the loader gate during unloading.

Answer 39

[container]

Question 40

What is the purpose of the hydraulic manual control handle during unloading procedures?

Answer 40

To relieve hydraulic pressure on the gun system.

Question 41

What should be done with the missile umbilical cable during downloading?

Answer 41

Disconnect it from the launcher receptacle.

Question 42

What must be done before removing the missile from the LAU-106A/A Missile Launcher?

Answer 42

Ensure safety pin is installed in missile launcher.

Question 43

What tool is required to open the manual release socket on the LAU-106A/A Missile Launcher?

Answer 43

3/8-inch square drive ratchet or equivalent.

Question 44

What should be done to prevent injury when closing the main landing gear doors?

Answer 44

Remain clear of door edges and sill area.

Question 45

What is the first step in downloading from a BRU-26 Bomb Ejector Rack?

Answer 45

Remove breech retainers from parent bomb rack and pylons.

Question 46

What type of wrench is used for the MAU-12-Series Bomb Rack Unloading?

Answer 46

3/8-inch drive ratchet wrench or equivalent.

Question 47

What is a potential hazard when handling impulse cartridges?

Answer 47

Static electricity ## Footnote Personnel should be grounded before handling.

Question 48

What is the procedure for downloading the AN/ALE-58 Countermeasures Dispenser Set?

Answer 48

* Press trigger and position locking lever to LOAD/UNLOAD * Place container beneath rear of dispenser * Turn wrench to unload packages

Question 49

What should be done before lowering the missile from the LAU-128A/A Missile Launcher?

Answer 49

Disconnect the missile motor fire connector.